Renfrewshire · Scotland
Ram-raid protection bollards in Johnstone
Planning ram-raid bollards in Johnstone? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageRam-raid bollards in Johnstone
Whether it's schools, filling-station forecourts and town-centre squares, ram-raid bollards in Johnstone are planned around who needs to get through and who doesn't. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover Johnstone's PA5, PA10, PA9, PA6, PA11 and PA12 postcode districts, including places such as Elderslie, Brookfield, Kilbarchan and Howwood. Jobs in Johnstone can be combined with work in Paisley (3.2 miles), Barrhead (5.2 miles), Erskine (5.6 miles) and Renfrew (5.6 miles) (straight-line distances). It sits roughly 10 miles from Glasgow as the crow flies.
Key facts for this area
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA5, PA10, PA9, PA6, PA11 and PA12
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
Typical ram-raid bollards jobs in Johnstone
Around Johnstone, ram-raid bollards usually solve one of these:
- Pharmacies and late-opening premises
- Premises that have already been targeted once
- Through-the-wall and freestanding ATMs
What ram-raid bollards cost in Johnstone
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Johnstone
In Scotland the council is the roads authority for local roads, which in Johnstone means Renfrewshire Council. Ram-raid bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Renfrewshire Council can confirm before anything is ordered.
Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
Installation, step by step
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
What affects the quote
When we price ram-raid bollards in Johnstone, these make the biggest difference:
- Number of posts across the frontage or ATM
- Out-of-hours working to avoid closing the shop
- Covers and finishes for shopping streets
After installation
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Ram-raid bollards are robust but not maintenance-free.
For damaged or loose posts in Johnstone, repairs and replacements are priced in writing first.
Ram-raid bollards in Johnstone: FAQs
Can you install ram-raid bollards anywhere in Johnstone?
We cover all of Johnstone (PA5, PA10, PA9, PA6, PA11 and PA12) and the rest of Renfrewshire. We also work in Paisley, Barrhead and Erskine.
Who gives permission for bollards on the pavement in Johnstone?
Johnstone falls under Renfrewshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for ram-raid bollards in Johnstone?
In Johnstone, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Ram-raid bollards in nearby towns
- Paisley (3.2 mi)
- Barrhead (5.2 mi)
- Erskine (5.6 mi)
- Renfrew (5.6 mi)
- Clydebank (6.6 mi)
- Newton Mearns (8.1 mi)