Renfrewshire · Scotland
Bollard removal in Johnstone
Local installation of bollard removal jobs in Johnstone — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageBollard removal in Johnstone
We supply and fit bollard removal jobs throughout Johnstone, typically for sites such as filling-station forecourts, small industrial units and community buildings. Removal of fixed, removable, telescopic and automatic bollards, including foundations, with the surface made good to match.
We work across PA5, PA10, PA9, PA6, PA11 and PA12 — Johnstone itself and places including Elderslie, Brookfield, Kilbarchan and Howwood. Nearby, we also work in Paisley (3.2 miles), Barrhead (5.2 miles), Erskine (5.6 miles) and Renfrew (5.6 miles), measured as the crow flies. Johnstone is about 10 miles from Glasgow.
Local details
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA5, PA10, PA9, PA6, PA11 and PA12
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
What bollard removal jobs cost in Johnstone
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
Why Johnstone sites book bollard removal jobs
Why sites in Johnstone book bollard removal jobs:
- Access routes no longer needing control
- Car park and forecourt redesigns
- Removing redundant lighting bollards
Before we dig in Johnstone
In Scotland the council is the roads authority for local roads, which in Johnstone means Renfrewshire Council. Bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Many private-land installations in Johnstone need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Renfrewshire Council before posts go in.
Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first. Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
What happens on site
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Choosing the right spec
| Option | Detail |
|---|---|
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
What moves the price in Johnstone
Our Scotland guide prices are a starting point; the survey in Johnstone firms them up. What tends to move them:
- Number and type of bollards
- Size of foundations and amount of spoil
- Surface type and reinstatement
After installation
Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected. Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled.
We can also service, repair or replace existing posts anywhere in Johnstone.
Questions about bollard removal jobs in Johnstone
Do you carry out bollard removal jobs in Johnstone?
We cover all of Johnstone (PA5, PA10, PA9, PA6, PA11 and PA12) and the rest of Renfrewshire. We also work in Paisley, Barrhead and Erskine.
Do I need consent for bollards on a public footway in Johnstone?
Johnstone falls under Renfrewshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for bollard removal jobs in Johnstone?
In Johnstone, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.
Bollard removal in nearby towns
- Paisley (3.2 mi)
- Barrhead (5.2 mi)
- Erskine (5.6 mi)
- Renfrew (5.6 mi)
- Clydebank (6.6 mi)
- Newton Mearns (8.1 mi)