Renfrewshire · Scotland
Bollard removal in Paisley
Planning bollard removal jobs in Paisley? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imagePaisley bollard removal jobs
Across Paisley, typical sites for bollard removal jobs include college campuses, leisure centres and industrial estates. Posts can be cut off at or below ground level or fully extracted with their concrete.
Coverage in Paisley takes in the PA2, PA1 and PA3 postcode districts. We also cover neighbouring Barrhead (2.7 miles), Johnstone (3.2 miles), Renfrew (3.2 miles) and Erskine (4.8 miles) — distances are straight-line. Glasgow is around 7 miles away.
Paisley at a glance
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA2, PA1 and PA3
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
Why Paisley sites book bollard removal jobs
Why sites in Paisley book bollard removal jobs:
- Removing redundant lighting bollards
- Decommissioning automatic bollards that are no longer used
- Car park and forecourt redesigns
Bollard removal prices in Paisley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Paisley
In Scotland the council is the roads authority for local roads, which in Paisley means Renfrewshire Council. Bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Many private-land installations in Paisley need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Renfrewshire Council before posts go in.
Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface. Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
What happens on site
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Finishes and options
| Option | Detail |
|---|---|
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
Pricing bollard removal jobs in Paisley
When we price bollard removal jobs in Paisley, these make the biggest difference:
- Cutting off or full foundation extraction
- Size of foundations and amount of spoil
- Surface type and reinstatement
After installation
After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
For damaged or loose posts in Paisley, repairs and replacements are priced in writing first.
Bollard removal in Paisley: FAQs
Can you carry out bollard removal jobs anywhere in Paisley?
We cover all of Paisley (PA2, PA1 and PA3) and the rest of Renfrewshire. We also work in Barrhead, Johnstone and Renfrew.
Do I need consent for bollards on a public footway in Paisley?
For anything on the public footway in Paisley we check with the roads authority first — Renfrewshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do bollard removal jobs cost in Paisley?
In Paisley, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the roads authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Can removed bollards be reused elsewhere on site?
Often, if they come out undamaged. Steel posts and removable bollards relocate well. New foundations are formed at the new positions.
Bollard removal near Paisley
- Barrhead (2.7 mi)
- Johnstone (3.2 mi)
- Renfrew (3.2 mi)
- Erskine (4.8 mi)
- Clydebank (4.9 mi)
- Newton Mearns (5.6 mi)