Renfrewshire · Scotland
Ram-raid protection bollards in Paisley
Local installation of ram-raid bollards in Paisley — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imagePaisley ram-raid bollards
Across Paisley, typical sites for ram-raid bollards include town-centre streets, retail parks and industrial estates. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover the PA2, PA1 and PA3 postcode districts in Paisley. Nearby, we also work in Barrhead (2.7 miles), Johnstone (3.2 miles), Renfrew (3.2 miles) and Erskine (4.8 miles), measured as the crow flies. Glasgow is around 7 miles away.
Paisley at a glance
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA2, PA1 and PA3
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
Guide prices for Paisley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Paisley sites use ram-raid bollards for
Common uses in a place like Paisley:
- Through-the-wall and freestanding ATMs
- Pharmacies and late-opening premises
- Jewellers, pawnbrokers and phone shops holding high-value stock
What we check first in Paisley
For anything on the public footway in Paisley we check with the roads authority first — Renfrewshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
If your site in Paisley is listed or inside a conservation area, check with the local planning authority (Renfrewshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Deep foundations need care near the building's own footings and basement walls.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
What happens on site
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Options to consider
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
What affects the quote
When we price ram-raid bollards in Paisley, these make the biggest difference:
- Unrated, PAS 170-1 or crash-rated product
- Reinstatement of forecourt or natural stone surfaces
- Covers and finishes for shopping streets
Keeping them working
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Ram-raid bollards are robust but not maintenance-free.
If posts in Paisley are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about ram-raid bollards in Paisley
Which parts of Paisley do you cover for ram-raid bollards?
We cover all of Paisley (PA2, PA1 and PA3) and the rest of Renfrewshire. We also work in Barrhead, Johnstone and Renfrew.
Do I need consent for ram-raid bollards on a public footway in Paisley?
In Scotland the council is the roads authority for local roads, which in Paisley means Renfrewshire Council. Ram-raid bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for ram-raid bollards in Paisley?
In Paisley, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the roads authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Ram-raid bollards near Paisley
- Barrhead (2.7 mi)
- Johnstone (3.2 mi)
- Renfrew (3.2 mi)
- Erskine (4.8 mi)
- Clydebank (4.9 mi)
- Newton Mearns (5.6 mi)