Renfrewshire · Scotland
Ram-raid protection bollards in Renfrew
Ram-raid bollards for sites across Renfrew and the rest of Renfrewshire, from the first measurement to the last relaid paving block.
Computer-generated imageRenfrew ram-raid bollards
Ram-raid bollards suit plenty of Renfrew sites, town-centre squares, schools and filling-station forecourts among them. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover every part of Renfrew in the PA4 postcode district. Jobs in Renfrew can be combined with work in Clydebank (2.1 miles), Erskine (3 miles), Paisley (3.2 miles) and Bearsden (3.8 miles) (straight-line distances). It sits roughly 5 miles from Glasgow as the crow flies.
Key facts for this area
- Area
- Renfrewshire, Scotland
- Roads authority
- Renfrewshire Council (local roads)
- Planning authority
- Renfrewshire Council
- Postcodes
- PA4
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
Guide prices for Renfrew
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Renfrew sites use ram-raid bollards for
Typical reasons Renfrew sites choose ram-raid bollards:
- Through-the-wall and freestanding ATMs
- Convenience stores and off-licences with glazed frontages
- Premises that have already been targeted once
Permissions and groundwork in Renfrew
Renfrew falls under Renfrewshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
If your site in Renfrew is listed or inside a conservation area, check with the local planning authority (Renfrewshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Deep foundations need care near the building's own footings and basement walls.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
- Check who owns the ground in front of the shop; if it is public highway, the roads authority's agreement is needed.
How the job runs
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Specification choices
| Option | Detail |
|---|---|
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
What moves the price in Renfrew
Two Renfrew jobs with the same number of posts can price quite differently. The usual reasons:
- Reinstatement of forecourt or natural stone surfaces
- Out-of-hours working to avoid closing the shop
- Covers and finishes for shopping streets
Keeping them working
Ram-raid bollards are robust but not maintenance-free. If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point.
We can also service, repair or replace existing posts anywhere in Renfrew.
Ram-raid bollards in Renfrew: FAQs
Which parts of Renfrew do you cover for ram-raid bollards?
We cover all of Renfrew (PA4) and the rest of Renfrewshire. We also work in Clydebank, Erskine and Paisley.
Who gives permission for bollards on the pavement in Renfrew?
For anything on the public footway in Renfrew we check with the roads authority first — Renfrewshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for ram-raid bollards in Renfrew?
In Renfrew, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the roads authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.