London · England
Driveway security posts for homes in Merton
Planning driveway security posts in Merton? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageMerton driveway security posts
From carports, driveways and front-garden parking spaces, Merton has plenty of places where driveway security posts earn their keep. Telescopic, fold-down and removable security posts for home driveways, to deter car theft and stop unwanted parking.
We work across SW19, SM4, CR4 and SW20 — Merton itself and places including Wimbledon and Morden. We also cover neighbouring Wandsworth (2.9 miles), Sutton (3.7 miles), Kingston upon Thames (4.3 miles) and Lambeth (4.5 miles) — distances are straight-line.
Local details
- Area
- London, England
- Highway authority
- Merton Council (local roads)
- Planning authority
- Merton Council
- Postcodes
- SW19, SM4, CR4 and SW20
- Guide price
- Typically £445–£975 per post inc VAT; minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Wandsworth (2.9 mi), Sutton (3.7 mi), Kingston upon Thames (4.3 mi), Lambeth (4.5 mi)
Where driveway security posts go in around Merton
Typical reasons Merton sites choose driveway security posts:
- Open-plan frontages without gates
- Drives where a gate would not fit or is not allowed
- Owners of motorhomes, caravans and trailers
What driveway security posts cost in Merton
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £445–£665 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £765–£975 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Consents, ground and services in Merton
The highway authority for local roads in Merton is Merton Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Merton need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Merton Council before posts go in.
Block paving reinstates well because the original blocks can go back; tarmac, resin-bound and imprinted concrete show patching, so we keep cuts tight and positions sensible. Clay soils hold water, so a telescopic or semi-automatic cassette there needs a proper soakaway or a connection to a surface water drain, never the foul drain.
- In conservation areas or at listed buildings, check with the local planning authority before fitting visible posts.
- Connect any cassette drainage to surface water or a soakaway, not to the foul drain.
How the job runs
Free home survey
We look at your drive, how and where you park, the surface and what might be under it, such as the water pipe or a gas service. You receive a fixed written quote with the post type and position marked.
Mark the position
The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.
Cut the surface
Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.
Choosing the right spec
| Option | Detail |
|---|---|
| Telescopic posts | Retract into a cassette with a flush lid when lowered. Tidy and secure, but need depth and drainage under the drive. |
| Semi-automatic posts | Rise on their own when unlocked and push down to lower. Easier for daily use than lifting a post. |
| Removable posts | Lift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out. |
What affects the quote
Two Merton jobs with the same number of posts can price quite differently. The usual reasons:
- Type of post: telescopic, fold-down, removable or semi-automatic
- Finish and keyed-alike locks
- Drainage for telescopic and semi-automatic cassettes
After installation
Fold-down posts need the hinge oiled and anchors checked. With telescopic and semi-automatic posts, lift the lid every few months and check the cassette is not holding water or silt.
For damaged or loose posts in Merton, repairs and replacements are priced in writing first.
Questions about driveway security posts in Merton
Can you install driveway security posts anywhere in Merton?
We cover all of Merton (SW19, SM4, CR4 and SW20) and the rest of London. We also work in Wandsworth, Sutton and Kingston upon Thames.
Who gives permission for bollards on the pavement in Merton?
In Merton, work on adopted pavements and verges needs consent from Merton Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for driveway security posts in Merton?
In Merton, typically £445–£975 per post, supplied and installed, including VAT, with a minimum job of £445 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Will fitting a post damage my block paving?
Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.
Where should a driveway security post go?
Close enough in front of the car, or between it and the road, that the car cannot be driven round it. We mark the position with your car in place during the survey. Sloping drives and wide frontages may change the obvious spot.
Driveway security posts near Merton
- Wandsworth (2.9 mi)
- Sutton (3.7 mi)
- Kingston upon Thames (4.3 mi)
- Lambeth (4.5 mi)
- Richmond upon Thames (4.8 mi)
- Ewell (5 mi)