Bollard Installers

Shropshire · England

Driveway security posts for homes in Telford

Driveway security posts for sites across Telford and the rest of Shropshire, from the first measurement to the last relaid paving block.

Black driveway security post locked upright in front of a parked car on a semi-detached house drivewayComputer-generated image

Telford driveway security posts

Whether it's driveways, new-build estate drives and carports, driveway security posts in Telford are planned around who needs to get through and who doesn't. The right one depends on the surface, the depth available and how often the post will be used.

We cover Telford's TF3, TF4, TF2, TF7, TF1 and TF8 postcode districts, including places such as Coalmoor. Nearby, we also work in Wellington (3.3 miles), Shrewsbury (12.9 miles), Wolverhampton (15.1 miles) and Wednesfield (16.2 miles), measured as the crow flies. Telford is about 15 miles from Wolverhampton.

Local details

Area
Shropshire, England
Highway authority
Telford and Wrekin Council (local roads)
Planning authority
Telford and Wrekin Council
Postcodes
TF3, TF4, TF2, TF7, TF1, TF8 and TF5
Guide price
Typically £385–£845 per post inc VAT; minimum job £395
Survey
Free, with a fixed written quote
Nearby
Wellington (3.3 mi), Shrewsbury (12.9 mi), Wolverhampton (15.1 mi), Wednesfield (16.2 mi)

What Telford sites use driveway security posts for

Around Telford, driveway security posts usually solve one of these:

  • Drives where neighbours or visitors keep parking
  • Homes worried about keyless or relay car theft
  • Houses near stations, schools or shops where drives get borrowed

Guide prices for Telford

SpecificationGuide priceIncludes
Standard£385–£575 inc VATStandard post, foundation, reinstatement
Upgraded£525–£715 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£665–£845 inc VATHeavy-duty or architectural spec, premium finish

Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.

Permissions and groundwork in Telford

In Telford, work on adopted pavements and verges needs consent from Telford and Wrekin Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Telford and Wrekin Council) first — we flag this at survey.

Domestic drives hide more than people expect. Block paving reinstates well because the original blocks can go back; tarmac, resin-bound and imprinted concrete show patching, so we keep cuts tight and positions sensible.

  • Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the highway authority's agreement.
  • In conservation areas or at listed buildings, check with the local planning authority before fitting visible posts.

From survey to handover

Mark the position

The position is marked with the car in place, so we can check it blocks the car and that you can still open doors and walk past.

Fit the post

Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.

Make good and show you

The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.

Finishes and options

OptionDetail
Semi-automatic postsRise on their own when unlocked and push down to lower. Easier for daily use than lifting a post.
Telescopic postsRetract into a cassette with a flush lid when lowered. Tidy and secure, but need depth and drainage under the drive.
FinishesBlack, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night.

What moves the price in Telford

When we price driveway security posts in Telford, these make the biggest difference:

  • Drive surface and how visible a repair will be
  • Depth available and services under the drive
  • Type of post: telescopic, fold-down, removable or semi-automatic

After installation

Fold-down posts need the hinge oiled and anchors checked. Keep a spare key somewhere safe away from the car keys.

For damaged or loose posts in Telford, repairs and replacements are priced in writing first.

Driveway security posts in Telford: FAQs

Which parts of Telford do you cover for driveway security posts?

We cover all of Telford (TF3, TF4, TF2, TF7, TF1 and TF8) and the rest of Shropshire. We also work in Wellington, Shrewsbury and Wolverhampton.

Do I need consent for driveway security posts on a public footway in Telford?

In Telford, work on adopted pavements and verges needs consent from Telford and Wrekin Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.

What's a typical price for driveway security posts in Telford?

In Telford, typically £385–£845 per post, supplied and installed, including VAT, with a minimum job of £395 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.

Which type of post is right for my driveway?

Telescopic if you want a flush, tidy finish and will use it daily, provided the ground can be dug and drained. Fold-down if digging is not possible or the drive is concrete. Removable if the post will only be used occasionally and you have somewhere to store it.

Where should a driveway security post go?

Close enough in front of the car, or between it and the road, that the car cannot be driven round it. We mark the position with your car in place during the survey. Sloping drives and wide frontages may change the obvious spot.

Driveway security posts near Telford

Other bollard services in Telford

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote