Tyne and Wear · England
Driveway security posts for homes in Tynemouth
Planning driveway security posts in Tynemouth? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageDriveway security posts in Tynemouth
In the town of Tynemouth, driveway security posts tend to go in at driveways, new-build estate drives and front-garden parking spaces. The common types are telescopic posts that retract into the ground, fold-down posts that hinge flat, and removable posts that lift out of a socket.
Coverage in Tynemouth takes in the NE30 and NE29 postcode districts. Jobs in Tynemouth can be combined with work in North Shields (0.9 miles), South Shields (1.4 miles), Whitley Bay (1.7 miles) and Jarrow (3.5 miles) (straight-line distances). Newcastle upon Tyne is around 8 miles away.
Tynemouth at a glance
- Area
- Tyne and Wear, England
- Highway authority
- North Tyneside Council (local roads)
- Planning authority
- North Tyneside Council
- Postcodes
- NE30 and NE29
- Guide price
- Typically £365–£815 per post inc VAT; minimum job £375
- Survey
- Free, with a fixed written quote
- Nearby
- North Shields (0.9 mi), South Shields (1.4 mi), Whitley Bay (1.7 mi), Jarrow (3.5 mi)
Tynemouth: typical driveway security post prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£555 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £505–£685 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £635–£815 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
Where driveway security posts go in around Tynemouth
Around Tynemouth, driveway security posts usually solve one of these:
- Open-plan frontages without gates
- Houses near stations, schools or shops where drives get borrowed
- Owners of motorhomes, caravans and trailers
Before we dig in Tynemouth
The highway authority for local roads in Tynemouth is North Tyneside Council; motorways and trunk roads sit with National Highways. Driveway security posts on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North Tyneside Council) first — we flag this at survey.
The water supply pipe, gas service and electric cable all cross the front garden, often at shallow depth and rarely where you would guess, and older drives may cover inspection chambers or soakaways. Clay soils hold water, so a telescopic or semi-automatic cassette there needs a proper soakaway or a connection to a surface water drain, never the foul drain.
- Make sure the post is on your own land; a post on the pavement or the dropped kerb needs the highway authority's agreement.
- Connect any cassette drainage to surface water or a soakaway, not to the foul drain.
Installation, step by step
Cut the surface
Block paving is lifted carefully for reuse; tarmac, concrete or resin is cut neatly to keep the patch as small as possible.
Fit the post
Telescopic cassettes and removable sockets are set flush in concrete with drainage beneath. Fold-down posts are anchored to concrete or a small new pad.
Make good and show you
The surface is reinstated and cleaned. We show you how to lock, lower and raise the post and hand over the keys.
Options to consider
| Option | Detail |
|---|---|
| Removable posts | Lift out of a shallow socket and lock in place. Simple and low cost to fit, but must be stored when out. |
| Keyed-alike locks | Two posts or more can be supplied so one key opens both, which helps households with several cars. |
| Finishes | Black, grey, yellow or stainless finishes, with reflective bands so visitors see the post at night. |
What moves the price in Tynemouth
When we price driveway security posts in Tynemouth, these make the biggest difference:
- Finish and keyed-alike locks
- Number of posts for the cars on the drive
- Depth available and services under the drive
After installation
Fold-down posts need the hinge oiled and anchors checked. Keep a spare key somewhere safe away from the car keys.
If posts in Tynemouth are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install driveway security posts anywhere in Tynemouth?
We cover all of Tynemouth (NE30 and NE29) and the rest of Tyne and Wear. We also work in North Shields, South Shields and Whitley Bay.
Do I need consent for driveway security posts on a public footway in Tynemouth?
In Tynemouth, work on adopted pavements and verges needs consent from North Tyneside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for driveway security posts in Tynemouth?
In Tynemouth, typically £365–£815 per post, supplied and installed, including VAT, with a minimum job of £375 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Where should a driveway security post go?
Close enough in front of the car, or between it and the road, that the car cannot be driven round it. We mark the position with your car in place during the survey. Sloping drives and wide frontages may change the obvious spot.
Will fitting a post damage my block paving?
Only a small area is lifted and the original blocks are relaid around the post. Done carefully, the repair is hard to spot. Resin and imprinted drives show patching more.
Driveway security posts near Tynemouth
- North Shields (0.9 mi)
- South Shields (1.4 mi)
- Whitley Bay (1.7 mi)
- Jarrow (3.5 mi)
- Hebburn (4.7 mi)
- Wallsend (4.7 mi)