Tyne and Wear · England
Ram-raid protection bollards in Tynemouth
Local installation of ram-raid bollards in Tynemouth — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout ram-raid bollards in Tynemouth
From community car parks, filling-station forecourts and high street shopfronts, Tynemouth has plenty of places where ram-raid bollards earn their keep. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Tynemouth takes in the NE30 and NE29 postcode districts. Nearby, we also work in North Shields (0.9 miles), South Shields (1.4 miles), Whitley Bay (1.7 miles) and Jarrow (3.5 miles), measured as the crow flies. Newcastle upon Tyne is around 8 miles away.
Key facts for this area
- Area
- Tyne and Wear, England
- Highway authority
- North Tyneside Council (local roads)
- Planning authority
- North Tyneside Council
- Postcodes
- NE30 and NE29
- Guide price
- Typically £375–£1,445 per bollard + VAT; minimum job £905
- Survey
- Free, with a fixed written quote
- Nearby
- North Shields (0.9 mi), South Shields (1.4 mi), Whitley Bay (1.7 mi), Jarrow (3.5 mi)
Typical ram-raid bollards jobs in Tynemouth
Common uses in a place like Tynemouth:
- Warehouses and trade counters with roller-shutter entrances
- Filling station kiosks and forecourt shops
- Convenience stores and off-licences with glazed frontages
Tynemouth: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £375–£825 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £995–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
What we check first in Tynemouth
The highway authority for local roads in Tynemouth is North Tyneside Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Tynemouth is listed or inside a conservation area, check with the local planning authority (North Tyneside Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
What happens on site
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
What moves the price in Tynemouth
Our North East guide prices are a starting point; the survey in Tynemouth firms them up. What tends to move them:
- Number of posts across the frontage or ATM
- Foundation depth and what is found under the pavement
- Unrated, PAS 170-1 or crash-rated product
Looking after them
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Ram-raid bollards are robust but not maintenance-free.
We can also service, repair or replace existing posts anywhere in Tynemouth.
Questions about ram-raid bollards in Tynemouth
Which parts of Tynemouth do you cover for ram-raid bollards?
We cover all of Tynemouth (NE30 and NE29) and the rest of Tyne and Wear. We also work in North Shields, South Shields and Whitley Bay.
Do I need consent for ram-raid bollards on a public footway in Tynemouth?
In Tynemouth, work on adopted pavements and verges needs consent from North Tyneside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for ram-raid bollards in Tynemouth?
In Tynemouth, typically £375–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £905 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Ram-raid bollards near Tynemouth
- North Shields (0.9 mi)
- South Shields (1.4 mi)
- Whitley Bay (1.7 mi)
- Jarrow (3.5 mi)
- Hebburn (4.7 mi)
- Wallsend (4.7 mi)