Bollard Installers

England · 13 towns

Ram-raid protection bollards in Tyne and Wear

Ram-raid bollards for sites across Tyne and Wear: surveyed, quoted in writing and installed by our crews.

Stainless steel bollards protecting the glazed front of a convenience store on a terraced street at nightComputer-generated image

Ram-raid bollards in Tyne and Wear

Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. We cover Tyne and Wear — Newcastle upon Tyne, Sunderland, South Shields, Gateshead and Washington and more.

Highway authorities for local roads in Tyne and Wear: Gateshead Council, Newcastle City Council, North Tyneside Council, South Tyneside Council and Sunderland City Council.

Choose your town in Tyne and Wear

Guide prices in Tyne and Wear

SpecificationGuide priceIncludes
Standard£375–£825 + VATStandard post, foundation, reinstatement
Upgraded£695–£1,145 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£995–£1,445 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.

Who looks after the roads in Tyne and Wear

TownHighway / roads authorityPlanning authority
Newcastle upon TyneNewcastle City Councilthe council for Newcastle upon Tyne
SunderlandSunderland City CouncilSunderland City Council
South ShieldsSouth Tyneside CouncilSouth Tyneside Council
GatesheadGateshead CouncilGateshead Council
WashingtonSunderland City CouncilSunderland City Council
TynemouthNorth Tyneside CouncilNorth Tyneside Council
WallsendNorth Tyneside CouncilNorth Tyneside Council
North ShieldsNorth Tyneside CouncilNorth Tyneside Council
Whitley BayNorth Tyneside CouncilNorth Tyneside Council
Houghton-le-SpringSunderland City CouncilSunderland City Council
FellingGateshead CouncilGateshead Council
JarrowSouth Tyneside CouncilSouth Tyneside Council
HebburnSouth Tyneside CouncilSouth Tyneside Council

Rules for ram-raid bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.

Details and sources: bollard rules in England.

How installation works

Look at how a vehicle would approach

At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.

Agree the post type and positions

We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.

Excavate and set the posts

Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.

Reinstate the pavement

Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.

Ram-raid bollards in Tyne and Wear: FAQs

Do you cover all of Tyne and Wear for ram-raid bollards?

Yes — including Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Tynemouth, Wallsend and North Shields. Enter your postcode in the price calculator to confirm.

How much do ram-raid bollards cost in Tyne and Wear?

In Tyne and Wear, typically £375–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £905 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Tyne and Wear?

For local roads, Gateshead Council, Newcastle City Council, North Tyneside Council, South Tyneside Council and Sunderland City Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Will bollards stop an ATM being ripped out?

Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.

Will bollards spoil the look of the shop?

They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.

Other services in Tyne and Wear

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote