Tyne and Wear · England
Ram-raid protection bollards in Gateshead
Planning ram-raid bollards in Gateshead? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout ram-raid bollards in Gateshead
Whether it's retail parks, business parks and town-centre streets, ram-raid bollards in Gateshead are planned around who needs to get through and who doesn't. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Gateshead takes in the NE8, NE11, NE10, NE9, NE16 and NE21 postcode districts and nearby places like Blaydon, Kibblesworth, Whickham and Sunniside. Nearby, we also work in Newcastle upon Tyne (0.9 miles), Felling (1.4 miles), Wallsend (3.4 miles) and Hebburn (3.5 miles), measured as the crow flies.
Local details
- Area
- Tyne and Wear, England
- Highway authority
- Gateshead Council (local roads)
- Planning authority
- Gateshead Council
- Postcodes
- NE8, NE11, NE10, NE9, NE16 and NE21
- Guide price
- Typically £375–£1,445 per bollard + VAT; minimum job £905
- Survey
- Free, with a fixed written quote
- Nearby
- Newcastle upon Tyne (0.9 mi), Felling (1.4 mi), Wallsend (3.4 mi), Hebburn (3.5 mi)
What ram-raid bollards cost in Gateshead
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £375–£825 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £995–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
What Gateshead sites use ram-raid bollards for
Common uses in a place like Gateshead:
- Convenience stores and off-licences with glazed frontages
- Through-the-wall and freestanding ATMs
- Warehouses and trade counters with roller-shutter entrances
Consents, ground and services in Gateshead
Gateshead Council is the highway authority covering Gateshead's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Gateshead need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Gateshead Council before posts go in.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Deep foundations need care near the building's own footings and basement walls.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
From survey to handover
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Specification choices
| Option | Detail |
|---|---|
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
Pricing ram-raid bollards in Gateshead
Our North East guide prices are a starting point; the survey in Gateshead firms them up. What tends to move them:
- Removable positions and their locks
- Out-of-hours working to avoid closing the shop
- Number of posts across the frontage or ATM
Looking after them
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
We can also service, repair or replace existing posts anywhere in Gateshead.
Common questions
Which parts of Gateshead do you cover for ram-raid bollards?
We cover all of Gateshead (NE8, NE11, NE10, NE9, NE16 and NE21) and the rest of Tyne and Wear. We also work in Newcastle upon Tyne, Felling and Wallsend.
Who gives permission for bollards on the pavement in Gateshead?
In Gateshead, work on adopted pavements and verges needs consent from Gateshead Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for ram-raid bollards in Gateshead?
In Gateshead, typically £375–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £905 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Ram-raid bollards near Gateshead
- Newcastle upon Tyne (0.9 mi)
- Felling (1.4 mi)
- Wallsend (3.4 mi)
- Hebburn (3.5 mi)
- Jarrow (4.8 mi)
- Washington (5.5 mi)