Tyne and Wear · England
Ram-raid protection bollards in South Shields
Ram-raid bollards supplied and fitted in South Shields, Tyne and Wear: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout ram-raid bollards in South Shields
From industrial estates, town-centre streets and college campuses, South Shields has plenty of places where ram-raid bollards earn their keep. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover every part of South Shields in the NE33 and NE34 postcode districts. Nearby, we also work in North Shields (1.4 miles), Tynemouth (1.4 miles), Jarrow (2.4 miles) and Whitley Bay (2.9 miles), measured as the crow flies. Newcastle upon Tyne is around 7 miles away.
Local details
- Area
- Tyne and Wear, England
- Highway authority
- South Tyneside Council (local roads)
- Planning authority
- South Tyneside Council
- Postcodes
- NE33 and NE34
- Guide price
- Typically £375–£1,445 per bollard + VAT; minimum job £905
- Survey
- Free, with a fixed written quote
- Nearby
- North Shields (1.4 mi), Tynemouth (1.4 mi), Jarrow (2.4 mi), Whitley Bay (2.9 mi)
Typical ram-raid bollards jobs in South Shields
Typical reasons South Shields sites choose ram-raid bollards:
- Convenience stores and off-licences with glazed frontages
- Premises that have already been targeted once
- Warehouses and trade counters with roller-shutter entrances
What ram-raid bollards cost in South Shields
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £375–£825 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £995–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
Consents, ground and services in South Shields
In South Shields, work on adopted pavements and verges needs consent from South Tyneside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in South Shields is listed or inside a conservation area, check with the local planning authority (South Tyneside Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Deep foundations need care near the building's own footings and basement walls.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
What happens on site
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Specification choices
| Option | Detail |
|---|---|
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
Pricing ram-raid bollards in South Shields
Two South Shields jobs with the same number of posts can price quite differently. The usual reasons:
- Covers and finishes for shopping streets
- Removable positions and their locks
- Foundation depth and what is found under the pavement
Looking after them
Ram-raid bollards are robust but not maintenance-free. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.
We can also service, repair or replace existing posts anywhere in South Shields.
Common questions
Which parts of South Shields do you cover for ram-raid bollards?
We cover all of South Shields (NE33 and NE34) and the rest of Tyne and Wear. We also work in North Shields, Tynemouth and Jarrow.
Do I need consent for ram-raid bollards on a public footway in South Shields?
In South Shields, work on adopted pavements and verges needs consent from South Tyneside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for ram-raid bollards in South Shields?
In South Shields, typically £375–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £905 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Ram-raid bollards near South Shields
- North Shields (1.4 mi)
- Tynemouth (1.4 mi)
- Jarrow (2.4 mi)
- Whitley Bay (2.9 mi)
- Hebburn (3.7 mi)
- Wallsend (4.1 mi)