Tyne and Wear · England
Steel security bollard installation in South Shields
Steel security bollards for sites across South Shields and the rest of Tyne and Wear, from the first measurement to the last relaid paving block.
Computer-generated imageSouth Shields steel security bollards
From leisure centres, industrial estates and business parks, South Shields has plenty of places where steel security bollards earn their keep. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
We cover the NE33 and NE34 postcode districts in South Shields. Jobs in South Shields can be combined with work in North Shields (1.4 miles), Tynemouth (1.4 miles), Jarrow (2.4 miles) and Whitley Bay (2.9 miles) (straight-line distances). It sits roughly 7 miles from Newcastle upon Tyne as the crow flies.
Local details
- Area
- Tyne and Wear, England
- Highway authority
- South Tyneside Council (local roads)
- Planning authority
- South Tyneside Council
- Postcodes
- NE33 and NE34
- Guide price
- Typically £185–£855 per bollard + VAT (£215–£1,045 inc VAT for homes); minimum job £565
- Survey
- Free, with a fixed written quote
- Nearby
- North Shields (1.4 mi), Tynemouth (1.4 mi), Jarrow (2.4 mi), Whitley Bay (2.9 mi)
What South Shields sites use steel security bollards for
Common uses in a place like South Shields:
- Car park perimeters, end-of-bay protection and walkway edges
- Stopping cut-through traffic on private roads and estates
- Forecourts and building entrances needing a visible boundary
Steel security bollard prices in South Shields
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£465 + VAT · £215–£555 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £385–£675 + VAT · £455–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £595–£855 + VAT · £705–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
Permissions and groundwork in South Shields
South Tyneside Council is the highway authority covering South Shields's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (South Tyneside Council) first — we flag this at survey.
Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found. Root-fixed posts need firm ground and enough depth to carry the post's root plus a concrete surround.
- Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
From survey to handover
Break out and excavate
For root-fixed posts, the surface is cut neatly and each hole is dug to depth, by hand near known services. For base plates, the slab is checked for thickness and soundness.
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Specification choices
| Option | Detail |
|---|---|
| Caps and heads | Dome, flat, chamfered or ball tops, with welded caps to keep water out of hollow posts. |
| Finishes | Hot-dip galvanised, then powder-coated in a RAL colour if wanted. Black, grey, yellow and green are common. |
| Base-plated | Bolted to a sound concrete slab with resin anchors. Quick to fit and easy to remove later, suited to light-duty and indoor use. |
What affects the quote
Our North East guide prices are a starting point; the survey in South Shields firms them up. What tends to move them:
- Ground conditions and buried services
- Number of posts and length of the line
- Tube diameter, wall thickness and concrete infill
After installation
Galvanised steel posts need little attention for years at a time. Powder coat chipped by vehicles should be touched up before the galvanising underneath starts to weather.
If posts in South Shields are later hit or damaged, we can repair or replace them — see bollard repairs.
Steel security bollards in South Shields: FAQs
Do you install steel security bollards in South Shields?
We cover all of South Shields (NE33 and NE34) and the rest of Tyne and Wear. We also work in North Shields, Tynemouth and Jarrow.
Do I need consent for steel security bollards on a public footway in South Shields?
In South Shields, work on adopted pavements and verges needs consent from South Tyneside Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do steel security bollards cost in South Shields?
In South Shields, typically £185–£855 per bollard, supplied and installed, plus VAT (£215–£1,045 including VAT for homeowners), with a minimum job of £565 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Will galvanised posts rust?
Hot-dip galvanising protects steel for a long time in normal outdoor conditions. Powder coat over the galvanising adds colour and extra protection. Touch up chips promptly in coastal or heavily salted locations.
What diameter of steel bollard do I need?
Match it to the job. Around 114 mm suits car park walkways and verges; 168 or 219 mm with a heavier wall suits service yards and corners that lorries pass. The survey looks at what is likely to hit the posts.
Steel security bollards near South Shields
- North Shields (1.4 mi)
- Tynemouth (1.4 mi)
- Jarrow (2.4 mi)
- Whitley Bay (2.9 mi)
- Hebburn (3.7 mi)
- Wallsend (4.1 mi)