Kent · England
Flexible bollard installation in Gravesend
Local installation of flexible bollards in Gravesend — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageFlexible bollards in Gravesend
We supply and fit flexible bollards throughout Gravesend, typically for sites such as local parades, high street shopfronts and community car parks. Polyurethane and spring-based bollards that bend when hit and return upright, for car parks, depots and lane separation.
We work across DA12, DA11 and DA13 — Gravesend itself and places including Shorne, Shorne Ridgeway, Sole Street and Gold Street. Jobs in Gravesend can be combined with work in Strood (5.7 miles), Dartford (6.8 miles), Rochester (6.9 miles) and Chatham (8 miles) (straight-line distances).
Gravesend at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Gravesham
- Postcodes
- DA12, DA11 and DA13
- Guide price
- Typically £205–£635 per bollard + VAT; minimum job £465
- Survey
- Free, with a fixed written quote
Where flexible bollards go in around Gravesend
Common uses in a place like Gravesend:
- Bus stations and coach parks
- Marking pedestrian routes inside multi-storey car parks
- Temporary or trial layouts before permanent kerbs
Gravesend: typical flexible bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£385 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £335–£515 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £465–£635 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Gravesend
In Gravesend, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Gravesham) first — we flag this at survey.
Multi-storey and rooftop decks are a special case: slabs may be post-tensioned or carry waterproofing and heating, so drilling depth and positions are agreed with the building owner and scanned first. Flexible bollards put repeated load on their fixings, because every knock rocks the base.
- Do not use flexible bollards where a physical barrier is needed to protect people or buildings; they guide rather than stop.
- Keep pedestrian gaps and routes clear, referring to Inclusive Mobility guidance where people walk through the line.
From survey to handover
Set out the line
Posts are set out to guide vehicles along the intended path, with spacing that reads as a line to drivers.
Fix the bases
Holes are drilled and cleaned, resin anchors or bolts are set and the bases fixed and torqued once cured. Socket bases are set flush in concrete.
Fit posts and test
Posts are fitted and bent by hand to confirm they return upright, and reflective sleeves are applied.
Finishes and options
| Option | Detail |
|---|---|
| Sprung-base bollards | A rigid post on a heavy spring or elastomer base that tilts and returns. Looks like a conventional bollard. |
| Colours and reflective sleeves | Yellow, black, red, white or orange, with reflective sleeves for visibility in low light. |
| Polyurethane posts | Flex along their length and return to shape. Gentle on vehicles and common in car parks and on forecourts. |
What affects the quote
Two Gravesend jobs with the same number of posts can price quite differently. The usual reasons:
- Deck scanning and restrictions on drilling
- Bolt-down or socket base
- Surface condition and need for concrete pads
After installation
Keep a few spare posts on site where knocks are frequent, so a damaged one can be swapped before the line develops a gap. Clean reflective sleeves so they stay visible, and replace them when they fade or peel.
For damaged or loose posts in Gravesend, repairs and replacements are priced in writing first.
Common questions
Do you install flexible bollards in Gravesend?
We cover all of Gravesend (DA12, DA11 and DA13) and the rest of Kent. We also work in Strood, Dartford and Rochester.
Who gives permission for bollards on the pavement in Gravesend?
In Gravesend, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for flexible bollards in Gravesend?
In Gravesend, typically £205–£635 per bollard, supplied and fixed, plus VAT, with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How many times can a flexible bollard be hit?
Many times in normal use, as long as the impacts are the low-speed bumps it is designed for. A heavy vehicle running right over it, or a high-speed strike, can tear it. Manufacturers give guidance for their products.
Can flexible bollards go in a multi-storey car park?
Yes, often with low-profile bases. The deck has to be checked first, as some slabs contain tendons or waterproofing that must not be drilled. The building owner usually needs to agree the fixing method.