Kent · England
Removable bollard installation in Gravesend
Planning removable bollards in Gravesend? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout removable bollards in Gravesend
Whether it's residential driveways, small industrial units and local parades, removable bollards in Gravesend are planned around who needs to get through and who doesn't. Lift-out bollards in lockable ground sockets for driveways, delivery routes, access roads and emergency access points.
We work across DA12, DA11 and DA13 — Gravesend itself and places including Shorne, Shorne Ridgeway, Sole Street and Gold Street. Nearby, we also work in Strood (5.7 miles), Dartford (6.8 miles), Rochester (6.9 miles) and Chatham (8 miles), measured as the crow flies.
Local details
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Gravesham
- Postcodes
- DA12, DA11 and DA13
- Guide price
- Typically £265–£895 per bollard + VAT (£315–£1,045 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
Gravesend: typical removable bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £265–£525 + VAT · £315–£625 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £455–£715 + VAT · £545–£855 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £645–£895 + VAT · £765–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Removable bollards in Gravesend: common uses
Around Gravesend, removable bollards usually solve one of these:
- Emergency and fire service access routes
- Driveways and private parking bays
- Gaps in a fixed bollard line that must open occasionally
Before we dig in Gravesend
Kent County Council is the highway authority covering Gravesend's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Gravesend is listed or inside a conservation area, check with the local planning authority (the council for Gravesham) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
A socket set even a few millimetres proud becomes a trip edge and gets clipped by tyres and snow ploughs; one set low collects water and grit. On thin tarmac drives, the surround is sized so the socket does not loosen over time.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
How the job runs
Agree who will lift the post
At the free site survey we talk through who will remove the post, how often and where it will be stored. That decides material, diameter and lock, and goes into a fixed written quote.
Set the socket flush
The socket is set in concrete with its rim exactly at finished surface level and to the fall of the ground, so the lid sits flat and nothing catches on it.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Choosing the right spec
| Option | Detail |
|---|---|
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
| Steel, stainless or aluminium posts | Galvanised and powder-coated steel for robustness, stainless for appearance, aluminium where lightness matters for frequent lifting. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
What affects the quote
Two Gravesend jobs with the same number of posts can price quite differently. The usual reasons:
- Rated removable posts where security is required
- Number of posts and sockets
- Lock type and whether locks are keyed alike
Keeping them working
If a socket has worked loose in the surface, re-bed it before the lid edge becomes a trip hazard. Keep spare keys somewhere sensible, because lost keys are a common reason for a post being cut out.
If posts in Gravesend are later hit or damaged, we can repair or replace them — see bollard repairs.
Removable bollards in Gravesend: FAQs
Which parts of Gravesend do you cover for removable bollards?
We cover all of Gravesend (DA12, DA11 and DA13) and the rest of Kent. We also work in Strood, Dartford and Rochester.
Do I need consent for removable bollards on a public footway in Gravesend?
In Gravesend, work on adopted pavements and verges needs consent from Kent County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for removable bollards in Gravesend?
In Gravesend, typically £265–£895 per bollard with ground socket, supplied and installed, plus VAT (£315–£1,045 including VAT for homeowners), with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can all the bollards on our site use one key?
Yes, if the locks are ordered keyed alike. That is common on estates and car parks with several access points. Spare keys can be supplied at the same time.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.