Somerset · England
Flexible bollard installation in Taunton
Flexible bollards for sites across Taunton and the rest of Somerset, from the first measurement to the last relaid paving block.
Computer-generated imageAbout flexible bollards in Taunton
Polyurethane and spring-based bollards that bend when hit and return upright, for car parks, depots and lane separation. In Taunton, that tends to mean sites such as schools, small industrial units and filling-station forecourts.
Coverage in Taunton takes in the TA1, TA2 and TA3 postcode districts and nearby places like Monkton Heathfield, Norton Fitzwarren, Bathpool and Staplegrove. Nearby, we also work in Bridgwater (8.9 miles), Burnham-on-Sea (16.1 miles), Tiverton (18.6 miles) and Yeovil (21.1 miles), measured as the crow flies. It sits roughly 37 miles from Bristol as the crow flies.
Key facts for this area
- Area
- Somerset, England
- Highway authority
- Somerset Council (local roads)
- Planning authority
- Somerset Council
- Postcodes
- TA1, TA2 and TA3
- Guide price
- Typically £195–£595 per bollard + VAT; minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Bridgwater (8.9 mi), Burnham-on-Sea (16.1 mi), Tiverton (18.6 mi), Yeovil (21.1 mi)
What flexible bollards cost in Taunton
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£365 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £315–£485 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £435–£595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical flexible bollards jobs in Taunton
Typical reasons Taunton sites choose flexible bollards:
- Temporary or trial layouts before permanent kerbs
- Marking pedestrian routes inside multi-storey car parks
- Lane separation at car park entrances and exits
Before we dig in Taunton
In Taunton, work on adopted pavements and verges needs consent from Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Taunton is listed or inside a conservation area, check with the local planning authority (Somerset Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Where posts go in a line across a drainage fall, positions avoid channels and gullies. Multi-storey and rooftop decks are a special case: slabs may be post-tensioned or carry waterproofing and heating, so drilling depth and positions are agreed with the building owner and scanned first.
- Keep pedestrian gaps and routes clear, referring to Inclusive Mobility guidance where people walk through the line.
- Do not use flexible bollards where a physical barrier is needed to protect people or buildings; they guide rather than stop.
How the job runs
Survey traffic movements
The free site survey looks at vehicle sizes, turning paths and where drivers currently clip posts or kerbs. You receive a fixed written quote with post type and fixing.
Set out the line
Posts are set out to guide vehicles along the intended path, with spacing that reads as a line to drivers.
Hand over spares and records
Post and base details are recorded so replacements match, and spare posts can be left on site for busy locations. Staff are shown how a post is swapped on its base.
Finishes and options
| Option | Detail |
|---|---|
| Polyurethane posts | Flex along their length and return to shape. Gentle on vehicles and common in car parks and on forecourts. |
| Low-profile deck bases | Shallow fixings for multi-storey decks where deep drilling is not permitted. |
| Bolt-down or socket bases | Bolt-down for existing slabs; socket bases allow posts to be replaced without new fixings. |
What affects the quote
Two Taunton jobs with the same number of posts can price quite differently. The usual reasons:
- Surface condition and need for concrete pads
- Out-of-hours working in busy car parks
- Polymer posts or sprung-base bollards
After installation
After resurfacing or line repainting, check that the bases were not disturbed or painted over, and that posts still line up with the new markings. Check flexible bollards for splits, permanent bends and loose bases, and tighten or replace fixings that have worked loose.
We can also service, repair or replace existing posts anywhere in Taunton.
Common questions
Which parts of Taunton do you cover for flexible bollards?
We cover all of Taunton (TA1, TA2 and TA3) and the rest of Somerset. We also work in Bridgwater, Burnham-on-Sea and Tiverton.
Who gives permission for bollards on the pavement in Taunton?
Somerset Council is the highway authority covering Taunton's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do flexible bollards cost in Taunton?
In Taunton, typically £195–£595 per bollard, supplied and fixed, plus VAT, with a minimum job of £445 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Do flexible bollards damage vehicles?
Typically very little in a low-speed knock, which is a large part of their appeal. They may leave a scuff on paintwork. A rigid post in the same position would usually dent the vehicle and bend itself.
Can flexible bollards go in a multi-storey car park?
Yes, often with low-profile bases. The deck has to be checked first, as some slabs contain tendons or waterproofing that must not be drilled. The building owner usually needs to agree the fixing method.