Ceredigion · Wales
Lighting bollard installation in Cardigan
Local installation of lighting bollards in Cardigan — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageCardigan lighting bollards
Lighting bollards suit plenty of Cardigan sites, community buildings, schools and high street shopfronts among them. Outdoor lighting bollards need weatherproof and impact-resistant construction and must be connected and tested by a qualified electrician.
We cover Cardigan's SA43 postcode district, including places such as Aberporth, Cilgerran, Parcllyn and Blaenporth. Nearby, we also work in Carmarthen (21.9 miles), measured as the crow flies.
Local details
- Area
- Ceredigion, Wales
- Highway authority
- Ceredigion County Council (local roads)
- Planning authority
- Ceredigion County Council
- Postcodes
- SA43
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £815
- Survey
- Free, with a fixed written quote
- Nearby
- Carmarthen (21.9 mi)
Cardigan: typical lighting bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); -3% for Wales. Guide only — the fixed price follows a survey.
Typical lighting bollards jobs in Cardigan
Around Cardigan, lighting bollards usually solve one of these:
- Private gardens and long driveways
- Car park walkways and pedestrian crossings
- Building entrances and approach routes
Consents, ground and services in Cardigan
In Cardigan the highway authority for local roads is Ceredigion County Council. We confirm whether the ground is adopted highway before quoting, because lighting bollards on a public footway need its agreement first.
If your site in Cardigan is listed or inside a conservation area, check with the local planning authority (Ceredigion County Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Most of the work in a lighting bollard scheme is underground. Bases are set in firm ground with the cable entry facing the right way, and on paved routes the bollards are positioned so cables can be pulled through ducts rather than requiring surfaces to be lifted again later.
- Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
What happens on site
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Electrical connection
A qualified electrician installs the circuit protection, makes the connections in weatherproof enclosures and fits controls such as a photocell or timer.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Options to consider
| Option | Detail |
|---|---|
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
| Light distribution | 360-degree, asymmetric or louvred heads to light paths while limiting glare and light spill. |
What affects the quote
Two Cardigan jobs with the same number of posts can price quite differently. The usual reasons:
- Reinstatement of paving, tarmac or planting
- Number of bollards and their specification
- Mains or solar bollards
Looking after them
Photocells and timers need resetting when the clocks change unless they adjust automatically. If a run of bollards trips the circuit after rain, water ingress at a connection is the usual cause and needs an electrician.
For damaged or loose posts in Cardigan, repairs and replacements are priced in writing first.
Questions about lighting bollards in Cardigan
Which parts of Cardigan do you cover for lighting bollards?
We cover all of Cardigan (SA43) and the rest of Ceredigion. We also work in Carmarthen.
Who gives permission for bollards on the pavement in Cardigan?
In Cardigan the highway authority for local roads is Ceredigion County Council. We confirm whether the ground is adopted highway before quoting, because lighting bollards on a public footway need its agreement first.
How much do lighting bollards cost in Cardigan?
In Cardigan, typically £335–£1,145 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £815 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
How far apart should lighting bollards be?
That depends on the light output, beam pattern and how evenly the path needs to be lit. Spacing is worked out from the product's light data rather than a fixed distance. Too far apart leaves dark patches between pools of light.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.