Bollard Installers

Hampshire · England

Lighting bollard installation in Andover

Lighting bollards supplied and fitted in Andover, Hampshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.

LED lighting bollards along a curving paved path outside an office building at duskComputer-generated image

Andover lighting bollards

In the town of Andover, lighting bollards tend to go in at high street shopfronts, small industrial units and schools. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.

Coverage in Andover takes in the SP10 and SP11 postcode districts and nearby places like Knights Enham, Foxcotte, East Anton and Picket Piece. Nearby, we also work in Winchester (12.6 miles), Newbury (15 miles), Salisbury (16.4 miles) and Thatcham (16.7 miles), measured as the crow flies. Andover is about 22 miles from Southampton.

Key facts for this area

Area
Hampshire, England
Highway authority
Hampshire County Council (local roads)
Planning authority
the council for Test Valley
Postcodes
SP10 and SP11
Guide price
Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £845
Survey
Free, with a fixed written quote
Nearby
Winchester (12.6 mi), Newbury (15 mi), Salisbury (16.4 mi), Thatcham (16.7 mi)

What Andover sites use lighting bollards for

Typical reasons Andover sites choose lighting bollards:

  • Parks and areas where tall columns would be intrusive
  • Car park walkways and pedestrian crossings
  • Building entrances and approach routes

Guide prices for Andover

SpecificationGuide priceIncludes
Standard£345–£705 + VAT · £405–£845 inc VATStandard post, foundation, reinstatement
Upgraded£605–£955 + VAT · £725–£1,145 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£855–£1,195 + VAT · £1,045–£1,445 inc VATHeavy-duty or architectural spec, premium finish

Per bollard, installed with a qualified electrician (supply run extra); no regional adjustment. Guide only — the fixed price follows a survey.

Permissions and groundwork in Andover

The highway authority for local roads in Andover is Hampshire County Council; motorways and trunk roads sit with National Highways. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

Many private-land installations in Andover need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Test Valley before posts go in.

Bases are set in firm ground with the cable entry facing the right way, and on paved routes the bollards are positioned so cables can be pulled through ducts rather than requiring surfaces to be lifted again later. Most of the work in a lighting bollard scheme is underground.

  • Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
  • Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.

Installation, step by step

Dig cable routes

Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.

Electrical connection

A qualified electrician installs the circuit protection, makes the connections in weatherproof enclosures and fits controls such as a photocell or timer.

Reinstate

Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.

Options to consider

OptionDetail
Light distribution360-degree, asymmetric or louvred heads to light paths while limiting glare and light spill.
Solar bollardsSelf-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable.
Body materials and finishesPowder-coated aluminium or steel, or stainless steel, in colours to suit the building.

Pricing lighting bollards in Andover

When we price lighting bollards in Andover, these make the biggest difference:

  • Mains or solar bollards
  • Length of cable routes and surfaces to be cut
  • Controls such as photocells, timers or sensors

Looking after them

LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free. If a run of bollards trips the circuit after rain, water ingress at a connection is the usual cause and needs an electrician.

For damaged or loose posts in Andover, repairs and replacements are priced in writing first.

Questions about lighting bollards in Andover

Which parts of Andover do you cover for lighting bollards?

We cover all of Andover (SP10 and SP11) and the rest of Hampshire. We also work in Winchester, Newbury and Salisbury.

Do I need consent for lighting bollards on a public footway in Andover?

The highway authority for local roads in Andover is Hampshire County Council; motorways and trunk roads sit with National Highways. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

What's a typical price for lighting bollards in Andover?

In Andover, typically £345–£1,195 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £845 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.

Can bollard lights work on a timer or motion sensor?

Yes. Photocells switch them on at dusk, timers switch them off or dim them late at night and motion sensors bring them up when someone approaches. Combining controls saves energy and reduces light pollution.

Will lighting bollards survive in a car park?

Choose robust bodies with a high impact rating and place them where vehicles are unlikely to hit them, such as behind kerbs or alongside protective posts. A lighting bollard is not designed to stop a car.

Lighting bollards near Andover

More from us in Andover

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote