London · England
Lighting bollard installation in Greenwich
Local installation of lighting bollards in Greenwich — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageLighting bollards in Greenwich
In the borough of Greenwich, lighting bollards tend to go in at mews courtyards, office entrances and station forecourts. Outdoor lighting bollards need weatherproof and impact-resistant construction and must be connected and tested by a qualified electrician.
We work across SE3, SE7, SE18, SE9, SE10 and SE2 — Greenwich itself and places including Woolwich and Eltham. Nearby, we also work in Lewisham (2.8 miles), Bexley (4.2 miles), Newham (4.5 miles) and Tower Hamlets (4.9 miles), measured as the crow flies.
Key facts for this area
- Area
- London, England
- Highway authority
- Greenwich Council (local roads)
- Planning authority
- Greenwich Council
- Postcodes
- SE3, SE7, SE18, SE9, SE10, SE2 and SE28
- Guide price
- Typically £395–£1,395 per bollard + VAT (£465–£1,645 inc VAT for homes); minimum job £965
- Survey
- Free, with a fixed written quote
- Nearby
- Lewisham (2.8 mi), Bexley (4.2 mi), Newham (4.5 mi), Tower Hamlets (4.9 mi)
Where lighting bollards go in around Greenwich
Around Greenwich, lighting bollards usually solve one of these:
- Parks and areas where tall columns would be intrusive
- Private gardens and long driveways
- Building entrances and approach routes
Greenwich: typical lighting bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£805 + VAT · £465–£965 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,095 + VAT · £825–£1,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £985–£1,395 + VAT · £1,195–£1,645 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); +15% for London. Guide only — the fixed price follows a survey.
Before we dig in Greenwich
The highway authority for local roads in Greenwich is Greenwich Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Greenwich is listed or inside a conservation area, check with the local planning authority (Greenwich Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services. Bases are set in firm ground with the cable entry facing the right way, and on paved routes the bollards are positioned so cables can be pulled through ducts rather than requiring surfaces to be lifted again later.
- Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
Installation, step by step
Survey and lighting layout
A free site survey looks at the routes to be lit, where power can come from, surfaces and buried services. Bollard spacing is set from the product's light data, and you receive a fixed written quote.
Electrical connection
A qualified electrician installs the circuit protection, makes the connections in weatherproof enclosures and fits controls such as a photocell or timer.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Finishes and options
| Option | Detail |
|---|---|
| Controls | Photocells, timers, motion sensors and dimming to light only when and as much as needed. |
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
| Colour temperature | Warm white for residential and amenity areas; warmer or amber options near sensitive wildlife habitats. |
What moves the price in Greenwich
Two Greenwich jobs with the same number of posts can price quite differently. The usual reasons:
- Length of cable routes and surfaces to be cut
- Distance from the supply and circuit requirements
- Mains or solar bollards
After installation
A periodic electrical inspection checks that connections and protection are still sound. Clean diffusers so dirt and algae do not dim the light, check seals and fixings, and look for impact damage, especially in car parks.
For damaged or loose posts in Greenwich, repairs and replacements are priced in writing first.
Questions about lighting bollards in Greenwich
Which parts of Greenwich do you cover for lighting bollards?
We cover all of Greenwich (SE3, SE7, SE18, SE9, SE10 and SE2) and the rest of London. We also work in Lewisham, Bexley and Newham.
Who gives permission for bollards on the pavement in Greenwich?
Greenwich Council is the highway authority covering Greenwich's local roads. Red routes are managed by Transport for London. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do lighting bollards cost in Greenwich?
In Greenwich, typically £395–£1,395 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£465–£1,645 including VAT for homeowners), with a minimum job of £965 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Will lighting bollards survive in a car park?
Choose robust bodies with a high impact rating and place them where vehicles are unlikely to hit them, such as behind kerbs or alongside protective posts. A lighting bollard is not designed to stop a car.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Lighting bollards in nearby towns
- Lewisham (2.8 mi)
- Bexley (4.2 mi)
- Newham (4.5 mi)
- Tower Hamlets (4.9 mi)
- Southwark (5.1 mi)
- Bromley (7 mi)