London · England
Crash-rated bollard installation in Greenwich
Crash-rated bollards supplied and fitted in Greenwich, London: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageCrash-rated bollards in Greenwich
Crash-rated bollards suit plenty of Greenwich sites, places of worship, hospital approaches and station forecourts among them. Installation of impact-tested HVM bollards rated to ISO 22343-1 (or the superseded, still-accepted PAS 68 / IWA 14-1) on the tested foundation.
Coverage in Greenwich takes in the SE3, SE7, SE18, SE9, SE10 and SE2 postcode districts and nearby places like Woolwich and Eltham. Jobs in Greenwich can be combined with work in Lewisham (2.8 miles), Bexley (4.2 miles), Newham (4.5 miles) and Tower Hamlets (4.9 miles) (straight-line distances).
Greenwich at a glance
- Area
- London, England
- Highway authority
- Greenwich Council (local roads)
- Planning authority
- Greenwich Council
- Postcodes
- SE3, SE7, SE18, SE9, SE10, SE2 and SE28
- Guide price
- Typically £2,295–£11,495 per bollard + VAT; minimum job £4,595
- Survey
- Free, with a fixed written quote
- Nearby
- Lewisham (2.8 mi), Bexley (4.2 mi), Newham (4.5 mi), Tower Hamlets (4.9 mi)
What Greenwich sites use crash-rated bollards for
Around Greenwich, crash-rated bollards usually solve one of these:
- Data centres, utilities and critical infrastructure perimeters
- Building entrances and forecourts flagged in a security risk assessment
- Pedestrianised streets, plazas and crowded public spaces
Greenwich: typical crash-rated bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,295–£6,145 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £5,045–£8,895 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £7,795–£11,495 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard, supplied and installed on a standard tested foundation; +15% for London. Guide only — the fixed price follows a survey.
Before we dig in Greenwich
The highway authority for local roads in Greenwich is Greenwich Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Crash-rated bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Greenwich is listed or inside a conservation area, check with the local planning authority (Greenwich Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Footways and forecourts in towns are usually crowded with cables, gas mains, water pipes and old drainage, and a single unexpected duct can stop a bollard position. Reinstatement matches paving, tactile surfaces and kerbs.
- Agree how emergency vehicles will get through, and refer to guidance on selecting and installing vehicle security barriers such as PAS 69 or ISO 22343-2.
- Balance the gaps: narrow enough to stop a vehicle, typically no more than about 1,200 mm, but wide enough for wheelchair users and buggies — check against Inclusive Mobility guidance.
Installation, step by step
Start from the specification
We work from the specification issued by your security adviser or the manufacturer: product, rating, positions and foundation drawing. If no specification exists yet, we can put you in touch with the manufacturer's technical team, but we do not set the threat level ourselves.
Free site survey and ground checks
A free site survey looks at access, surfaces and likely services, followed by utility searches, radar scanning and trial holes where needed. You then receive a fixed written quote based on what the survey found.
Set out and excavate
Positions are set out to the drawing and excavated to the tested depth and width, with shoring where the ground needs it. Spoil is removed as work progresses.
Finishes and options
| Option | Detail |
|---|---|
| Rated removable or automatic posts | Where an entrance must open for deliveries or emergency vehicles, rated removable, retractable or automatic models are available. Check that the rating stated is for the exact model and position you are buying. |
| Deep or standard foundation designs | Deep foundations suit open ground where excavation is unrestricted. Where services or slabs get in the way, shallow-mount tested designs may be a better fit. |
| Static rated bollards | Fixed posts for permanent lines where vehicles never need to pass. They are a straightforward rated option to install and maintain. |
What affects the quote
Our London guide prices are a starting point; the survey in Greenwich firms them up. What tends to move them:
- The rating required and the product range that achieves it
- Buried services, diversions and ground investigation
- Traffic management, restricted working hours or night work in occupied sites
After installation
Movable rated bollards need a planned servicing schedule. A rated bollard that has stopped a vehicle has done its job and should be assessed with the manufacturer; in most cases the post, and sometimes the foundation insert, is replaced rather than straightened.
We can also service, repair or replace existing posts anywhere in Greenwich.
Common questions
Can you install crash-rated bollards anywhere in Greenwich?
We cover all of Greenwich (SE3, SE7, SE18, SE9, SE10 and SE2) and the rest of London. We also work in Lewisham, Bexley and Newham.
Who gives permission for bollards on the pavement in Greenwich?
In Greenwich, work on adopted pavements and verges needs consent from Greenwich Council, the local highway authority. Red routes are managed by Transport for London. Car parks, forecourts and other private land only need the owner's permission.
How much do crash-rated bollards cost in Greenwich?
In Greenwich, typically £2,295–£11,495 per bollard, supplied and installed on a standard tested foundation, plus VAT, with a minimum job of £4,595 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
What happens if a rated bollard is struck?
Make the area safe and have the post assessed before relying on it again. A rated bollard that has absorbed a serious impact is usually replaced, and the manufacturer may need to check the foundation or insert. We can install the replacement to the original tested detail.
Will you design our HVM layout?
No. Scheme design and threat assessment belong with your security adviser, a specialist consultant or the manufacturer's technical team. We install the products they specify, to the tested foundation, and work alongside them on site so the build matches the design.
Crash-rated bollards in nearby towns
- Lewisham (2.8 mi)
- Bexley (4.2 mi)
- Newham (4.5 mi)
- Tower Hamlets (4.9 mi)
- Southwark (5.1 mi)
- Bromley (7 mi)