North Yorkshire · England
Lighting bollard installation in Selby
Planning lighting bollards in Selby? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageLighting bollards in Selby
Across Selby, typical sites for lighting bollards include small industrial units, filling-station forecourts and schools. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.
We work across YO8 — Selby itself and places including Barlby, Brayton, Thorpe Willoughby and Cawood. Jobs in Selby can be combined with work in Goole (9.5 miles), Pontefract (11.9 miles), York (12.1 miles) and Castleford (12.7 miles) (straight-line distances). Selby is about 20 miles from Leeds.
Selby at a glance
- Area
- North Yorkshire, England
- Highway authority
- North Yorkshire Council (local roads)
- Planning authority
- North Yorkshire Council
- Postcodes
- YO8
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £815
- Survey
- Free, with a fixed written quote
- Nearby
- Goole (9.5 mi), Pontefract (11.9 mi), York (12.1 mi), Castleford (12.7 mi)
Selby: typical lighting bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
What Selby sites use lighting bollards for
Around Selby, lighting bollards usually solve one of these:
- Steps, ramps and changes in level
- Footpaths through housing developments and campuses
- Parks and areas where tall columns would be intrusive
Before we dig in Selby
The highway authority for local roads in Selby is North Yorkshire Council; motorways and trunk roads sit with National Highways. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Selby is listed or inside a conservation area, check with the local planning authority (North Yorkshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services. Most of the work in a lighting bollard scheme is underground.
- Where bollards light a public route, check the lighting levels the site owner or designer requires.
- Choose IP and IK ratings that suit the location, and do not rely on lighting bollards as vehicle barriers.
How the job runs
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Finishes and options
| Option | Detail |
|---|---|
| Controls | Photocells, timers, motion sensors and dimming to light only when and as much as needed. |
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
| Light distribution | 360-degree, asymmetric or louvred heads to light paths while limiting glare and light spill. |
What moves the price in Selby
Our Yorkshire and the Humber guide prices are a starting point; the survey in Selby firms them up. What tends to move them:
- Number of bollards and their specification
- Length of cable routes and surfaces to be cut
- Reinstatement of paving, tarmac or planting
After installation
A periodic electrical inspection checks that connections and protection are still sound. Photocells and timers need resetting when the clocks change unless they adjust automatically.
If posts in Selby are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about lighting bollards in Selby
Do you install lighting bollards in Selby?
We cover all of Selby (YO8) and the rest of North Yorkshire. We also work in Goole, Pontefract and York.
Do I need consent for lighting bollards on a public footway in Selby?
The highway authority for local roads in Selby is North Yorkshire Council; motorways and trunk roads sit with National Highways. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for lighting bollards in Selby?
In Selby, typically £335–£1,145 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £815 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Will lighting bollards survive in a car park?
Choose robust bodies with a high impact rating and place them where vehicles are unlikely to hit them, such as behind kerbs or alongside protective posts. A lighting bollard is not designed to stop a car.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Lighting bollards near Selby
- Goole (9.5 mi)
- Pontefract (11.9 mi)
- York (12.1 mi)
- Castleford (12.7 mi)
- Doncaster (18.2 mi)
- Wakefield (18.9 mi)