North Yorkshire · England
Telescopic bollard installation in Selby
Local installation of telescopic bollards in Selby — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageTelescopic bollards in Selby
Because the post stays in its cassette, there is nothing to store and nothing to lose. In Selby, that tends to mean sites such as residential driveways, filling-station forecourts and schools.
We work across YO8 — Selby itself and places including Barlby, Brayton, Thorpe Willoughby and Cawood. Jobs in Selby can be combined with work in Goole (9.5 miles), Pontefract (11.9 miles), York (12.1 miles) and Castleford (12.7 miles) (straight-line distances). Selby is about 20 miles from Leeds.
Selby at a glance
- Area
- North Yorkshire, England
- Highway authority
- North Yorkshire Council (local roads)
- Planning authority
- North Yorkshire Council
- Postcodes
- YO8
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Goole (9.5 mi), Pontefract (11.9 mi), York (12.1 mi), Castleford (12.7 mi)
Typical telescopic bollards jobs in Selby
Common uses in a place like Selby:
- Sites with no power for automatic bollards
- Shared drives that need occasional closing
- Domestic driveways where the bollard is used daily
Guide prices for Selby
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
What we check first in Selby
The highway authority for local roads in Selby is North Yorkshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Selby is listed or inside a conservation area, check with the local planning authority (North Yorkshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
- If the drive is shared, agree positions and keys with the other users first.
From survey to handover
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
Pricing telescopic bollards in Selby
When we price telescopic bollards in Selby, these make the biggest difference:
- Number of posts and keyed-alike locks
- Excavation depth and the presence of services under the drive
- Post size and whether lift assistance is wanted
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Lubricate the lock with a suitable spray, especially before winter.
We can also service, repair or replace existing posts anywhere in Selby.
Common questions
Which parts of Selby do you cover for telescopic bollards?
We cover all of Selby (YO8) and the rest of North Yorkshire. We also work in Goole, Pontefract and York.
Do I need consent for telescopic bollards on a public footway in Selby?
The highway authority for local roads in Selby is North Yorkshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do telescopic bollards cost in Selby?
In Selby, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Telescopic bollards near Selby
- Goole (9.5 mi)
- Pontefract (11.9 mi)
- York (12.1 mi)
- Castleford (12.7 mi)
- Doncaster (18.2 mi)
- Wakefield (18.9 mi)