England · 7 towns
Telescopic bollard installation in North Yorkshire
Telescopic bollards for sites across North Yorkshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageTelescopic bollards in North Yorkshire
Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads. We cover North Yorkshire — York, Middlesbrough, Harrogate, Scarborough and Redcar and more.
Highway authorities for local roads in North Yorkshire: City of York Council, Middlesbrough Council, North Yorkshire Council, Redcar and Cleveland Council and Stockton-on-Tees Council.
Choose your town in North Yorkshire
Guide prices in North Yorkshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
Local authorities across North Yorkshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| York | City of York Council | City of York Council |
| Middlesbrough | Middlesbrough Council | Middlesbrough Council |
| Harrogate | North Yorkshire Council | North Yorkshire Council |
| Scarborough | North Yorkshire Council | North Yorkshire Council |
| Redcar | Redcar and Cleveland Council | Redcar and Cleveland Council |
| Selby | North Yorkshire Council | North Yorkshire Council |
| Thornaby-on-Tees | Stockton-on-Tees Council | Stockton-on-Tees Council |
Rules for telescopic bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in England.
How installation works
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Telescopic bollards in North Yorkshire: FAQs
Do you cover all of North Yorkshire for telescopic bollards?
Yes — including York, Middlesbrough, Harrogate, Scarborough, Redcar, Selby and Thornaby-on-Tees. Enter your postcode in the price calculator to confirm.
How much do telescopic bollards cost in North Yorkshire?
In North Yorkshire, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in North Yorkshire?
For local roads, City of York Council, Middlesbrough Council, North Yorkshire Council, Redcar and Cleveland Council and Stockton-on-Tees Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.