Wales · 2 towns
Lighting bollard installation in Powys
Lighting bollards for sites across Powys: surveyed, quoted in writing and installed by our crews.
Computer-generated imageLighting bollards in Powys
We supply and install lighting bollards across Powys, with local pages for 2 towns below. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.
Highway authorities for local roads in Powys: Powys County Council.
Choose your town in Powys
Guide prices in Powys
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); -3% for Wales. Guide only — the fixed price follows a survey.
Local authorities across Powys
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Newtown | Powys County Council | Powys County Council |
| Brecon | Powys County Council | Powys County Council |
Rules for lighting bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Wales.
How installation works
Survey and lighting layout
A free site survey looks at the routes to be lit, where power can come from, surfaces and buried services. Bollard spacing is set from the product's light data, and you receive a fixed written quote.
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Lighting bollards in Powys: FAQs
Do you cover all of Powys for lighting bollards?
Yes — including Newtown and Brecon. Enter your postcode in the price calculator to confirm.
How much do lighting bollards cost in Powys?
In Powys, typically £335–£1,145 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £815 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Powys?
For local roads, Powys County Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Do lighting bollards need an electrician to install?
Yes, mains lighting bollards must be connected by a qualified electrician, who tests and certifies the circuit. We arrange that as part of the job. Solar bollards avoid mains work but provide less light.