Surrey · England
Lighting bollard installation in Reigate
Local installation of lighting bollards in Reigate — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout lighting bollards in Reigate
In the town of Reigate, lighting bollards tend to go in at local parades, community buildings and residential driveways. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.
We work across RH2 — Reigate itself and places including Nalderswood and Sidlow. Jobs in Reigate can be combined with work in Redhill (1.5 miles), Horley (4.8 miles), Banstead (5.9 miles) and Caterham (6.3 miles) (straight-line distances). It sits roughly 28 miles from Brighton as the crow flies.
Reigate at a glance
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Reigate and Banstead
- Postcodes
- RH2
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £895
- Survey
- Free, with a fixed written quote
Guide prices for Reigate
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); +6% for South East. Guide only — the fixed price follows a survey.
Where lighting bollards go in around Reigate
Typical reasons Reigate sites choose lighting bollards:
- Steps, ramps and changes in level
- Car park walkways and pedestrian crossings
- Hotel, restaurant and pub frontages
Before we dig in Reigate
Surrey County Council is the highway authority covering Reigate's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Reigate and Banstead) first — we flag this at survey.
Bases are set in firm ground with the cable entry facing the right way, and on paved routes the bollards are positioned so cables can be pulled through ducts rather than requiring surfaces to be lifted again later. Cable is protected by armour or duct, buried deep enough to avoid garden tools and future paving works, and marked with warning tape.
- Have the electrical installation designed, installed, tested and certified by a qualified electrician to BS 7671.
- Where bollards light a public route, check the lighting levels the site owner or designer requires.
Installation, step by step
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Electrical connection
A qualified electrician installs the circuit protection, makes the connections in weatherproof enclosures and fits controls such as a photocell or timer.
Reinstate
Trenches are backfilled and surfaces made good, whether paving, tarmac, gravel or turf.
Choosing the right spec
| Option | Detail |
|---|---|
| Body materials and finishes | Powder-coated aluminium or steel, or stainless steel, in colours to suit the building. |
| Mains LED bollards | Wired from a dedicated circuit for reliable lighting of paths and car parks. Needs cable routes and electrical certification. |
| Fixings | Anchor cages cast in concrete, base plates on existing slabs, or ground spikes for garden models. |
What moves the price in Reigate
Two Reigate jobs with the same number of posts can price quite differently. The usual reasons:
- Controls such as photocells, timers or sensors
- Reinstatement of paving, tarmac or planting
- Number of bollards and their specification
Keeping them working
LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free. Photocells and timers need resetting when the clocks change unless they adjust automatically.
For damaged or loose posts in Reigate, repairs and replacements are priced in writing first.
Lighting bollards in Reigate: FAQs
Which parts of Reigate do you cover for lighting bollards?
We cover all of Reigate (RH2) and the rest of Surrey. We also work in Redhill, Horley and Banstead.
Do I need consent for lighting bollards on a public footway in Reigate?
In Reigate, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for lighting bollards in Reigate?
In Reigate, typically £365–£1,245 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £895 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
How far apart should lighting bollards be?
That depends on the light output, beam pattern and how evenly the path needs to be lit. Spacing is worked out from the product's light data rather than a fixed distance. Too far apart leaves dark patches between pools of light.