Armagh City, Banbridge and Craigavon · Northern Ireland
Pedestrian protection bollards in Armagh
Local installation of pedestrian protection bollards in Armagh — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageArmagh pedestrian protection bollards
Bollards that separate people from vehicles at car parks, forecourts, walkways, drive-thrus and shop entrances. In Armagh, that tends to mean sites such as community car parks, schools and local parades.
We cover the BT61 and BT60 postcode districts in Armagh. Jobs in Armagh can be combined with work in Portadown (10.3 miles), Dungannon (11.3 miles), Craigavon (13.1 miles) and Banbridge (15.4 miles) (straight-line distances). It sits roughly 34 miles from Belfast as the crow flies.
Key facts for this area
- Area
- Armagh City, Banbridge and Craigavon, Northern Ireland
- Roads authority
- the Department for Infrastructure (DfI Roads)
- Planning authority
- Armagh City, Banbridge and Craigavon Borough Council
- Postcodes
- BT61 and BT60
- Guide price
- Typically £245–£1,195 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
What pedestrian protection bollards cost in Armagh
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£635 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£915 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £795–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for Northern Ireland. Guide only — the fixed price follows a survey.
Pedestrian protection bollards in Armagh: common uses
Common uses in a place like Armagh:
- Outdoor seating at cafes, pubs and restaurants
- Drive-thru lanes and order points next to seating
- Petrol station forecourts and kiosk frontages
Permissions and groundwork in Armagh
In Armagh, as everywhere in Northern Ireland, public roads and footways are looked after by DfI Roads rather than the council. If a post would sit on adopted footway, that consent comes first; private forecourts and car parks are a matter for the owner.
If your site in Armagh is listed or inside a conservation area, check with the local planning authority (Armagh City, Banbridge and Craigavon Borough Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement keeps walkways level and flush, because a trip edge around a new post in a busy car park creates the very hazard the posts are meant to reduce. Raised kerbs also change the picture: a high kerb slows a wheel but does not stop a bumper, so the post still needs to sit within reach of the overhang rather than behind it.
- Record why posts are where they are in the site's risk assessment, especially at drive-thrus and seating areas.
- Keep clear gaps of typically at least 1,000–1,200 mm and keep main walkways wide enough, referring to Inclusive Mobility guidance.
From survey to handover
Watch how the site works
The free site survey looks at where cars park, where people walk and queue, and where incidents or near misses have happened. You receive a fixed written quote with positions marked.
Reinstate
Paving, tarmac or concrete is made good flush around each post, with tactile paving reinstated where it was disturbed.
Agree a plan for live trading
Work is phased so entrances and walkways stay open, with each section fenced while it is dug and set. Busy sites often prefer early starts or quieter weekdays.
Finishes and options
| Option | Detail |
|---|---|
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts, for sites where proven performance has been asked for. |
| Concrete-filled steel posts | Root-fixed galvanised and powder-coated steel, the standard unrated choice for walkways and frontages. |
| Stainless or architectural finishes | Stainless sleeves or decorative posts for shop entrances and public-facing frontages. |
What affects the quote
When we price pedestrian protection bollards in Armagh, these make the biggest difference:
- Working around trading hours and live car parks
- Finishes such as stainless or decorative posts
- Number of posts and length of line
Looking after them
Protection bollards take the knocks they are there for, so inspect them regularly and after any reported strike. If one post keeps being hit, look at the bay layout or add a wheel stop rather than replacing the same post repeatedly.
We can also service, repair or replace existing posts anywhere in Armagh.
Questions about pedestrian protection bollards in Armagh
Can you install pedestrian protection bollards anywhere in Armagh?
We cover all of Armagh (BT61 and BT60) and the rest of Armagh City, Banbridge and Craigavon. We also work in Portadown, Dungannon and Craigavon.
Who gives permission for bollards on the pavement in Armagh?
In Armagh, as everywhere in Northern Ireland, public roads and footways are looked after by DfI Roads rather than the council. If a post would sit on adopted footway, that consent comes first; private forecourts and car parks are a matter for the owner.
How much do pedestrian protection bollards cost in Armagh?
In Armagh, typically £245–£1,195 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Northern Ireland guide prices. The fixed figure comes in writing after we've seen the site.
How far from the kerb should car park bollards go?
Far enough back that parked bumpers do not hit them, but not so far that they narrow the walkway. That distance depends on the bay length and kerb height. We set it on site with the layout in front of us.
Are wheel stops enough on their own?
Wheel stops help drivers judge where to stop but a car can mount them with a firm press on the accelerator. Used with bollards, they reduce daily knocks on the posts. On their own they are not a barrier.
Pedestrian protection near Armagh
- Portadown (10.3 mi)
- Dungannon (11.3 mi)
- Craigavon (13.1 mi)
- Banbridge (15.4 mi)
- Newry (17.8 mi)
- Cookstown (20.5 mi)