Greater Manchester · England
Pedestrian protection bollards in Salford
Pedestrian protection bollards for sites across Salford and the rest of Greater Manchester, from the first measurement to the last relaid paving block.
Computer-generated imageSalford pedestrian protection bollards
Across Salford, typical sites for pedestrian protection bollards include housing association car parks, business parks and leisure centres. Products range from unrated steel posts to bollards tested against low-speed impacts under PAS 170-1.
Coverage in Salford takes in the M6, M5, M50, M3 and M7 postcode districts. Nearby, we also work in Eccles (1.8 miles), Manchester (2.2 miles), Swinton (2.6 miles) and Stretford (2.8 miles), measured as the crow flies.
Salford at a glance
- Area
- Greater Manchester, England
- Highway authority
- Salford City Council (local roads)
- Planning authority
- Salford City Council
- Postcodes
- M6, M5, M50, M3 and M7
- Guide price
- Typically £245–£1,195 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Eccles (1.8 mi), Manchester (2.2 mi), Swinton (2.6 mi), Stretford (2.8 mi)
What pedestrian protection bollards cost in Salford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£635 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£915 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £795–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Where pedestrian protection bollards go in around Salford
Typical reasons Salford sites choose pedestrian protection bollards:
- EV charging points and trolley shelters
- Petrol station forecourts and kiosk frontages
- Shop entrances facing nose-in parking bays
What we check first in Salford
In Salford, work on adopted pavements and verges needs consent from Salford City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Salford City Council) first — we flag this at survey.
Reinstatement keeps walkways level and flush, because a trip edge around a new post in a busy car park creates the very hazard the posts are meant to reduce. Raised kerbs also change the picture: a high kerb slows a wheel but does not stop a bumper, so the post still needs to sit within reach of the overhang rather than behind it.
- Keep clear gaps of typically at least 1,000–1,200 mm and keep main walkways wide enough, referring to Inclusive Mobility guidance.
- Record why posts are where they are in the site's risk assessment, especially at drive-thrus and seating areas.
From survey to handover
Watch how the site works
The free site survey looks at where cars park, where people walk and queue, and where incidents or near misses have happened. You receive a fixed written quote with positions marked.
Excavate and set
Each position is cut, dug and checked for services, and the posts are set plumb in concrete to a consistent height.
Reinstate
Paving, tarmac or concrete is made good flush around each post, with tactile paving reinstated where it was disturbed.
Choosing the right spec
| Option | Detail |
|---|---|
| Stainless or architectural finishes | Stainless sleeves or decorative posts for shop entrances and public-facing frontages. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts, for sites where proven performance has been asked for. |
| Visibility bands | Reflective and contrasting bands help drivers and partially sighted pedestrians see posts. |
What moves the price in Salford
Two Salford jobs with the same number of posts can price quite differently. The usual reasons:
- Ground conditions and services along kerb lines
- Number of posts and length of line
- Unrated steel or PAS 170-1 tested products
Looking after them
Keep a simple note of strikes and their locations; over a year it shows which parts of the car park drivers find awkward, which is useful when the site is next resurfaced or re-lined. Touch up chipped coatings, renew faded bands, and check the surface around each base for cracks that suggest movement.
For damaged or loose posts in Salford, repairs and replacements are priced in writing first.
Common questions
Can you install pedestrian protection bollards anywhere in Salford?
We cover all of Salford (M6, M5, M50, M3 and M7) and the rest of Greater Manchester. We also work in Eccles, Manchester and Swinton.
Do I need consent for pedestrian protection bollards on a public footway in Salford?
The highway authority for local roads in Salford is Salford City Council; motorways and trunk roads sit with National Highways. Pedestrian protection bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do pedestrian protection bollards cost in Salford?
In Salford, typically £245–£1,195 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Do pedestrian protection bollards need to be crash-rated?
Not usually. They deal with low-speed driver errors, so firmly founded steel posts often suffice. Where an owner, insurer or designer wants proven performance, PAS 170-1 tested products are the usual choice.
Are wheel stops enough on their own?
Wheel stops help drivers judge where to stop but a car can mount them with a firm press on the accelerator. Used with bollards, they reduce daily knocks on the posts. On their own they are not a barrier.
Pedestrian protection in nearby towns
- Eccles (1.8 mi)
- Manchester (2.2 mi)
- Swinton (2.6 mi)
- Stretford (2.8 mi)
- Prestwich (3.2 mi)
- Urmston (3.8 mi)