Somerset · England
Pedestrian protection bollards in Clevedon
Planning pedestrian protection bollards in Clevedon? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout pedestrian protection bollards in Clevedon
From small industrial units, community car parks and schools, Clevedon has plenty of places where pedestrian protection bollards earn their keep. Products range from unrated steel posts to bollards tested against low-speed impacts under PAS 170-1.
Coverage in Clevedon takes in the BS21 postcode district and nearby places like Tickenham, Stone-edge Batch, Kingston Seymour and Walton in Gordano. We also cover neighbouring Nailsea (4.3 miles), Portishead (4.7 miles), Weston-super-Mare (8.4 miles) and Bristol (11.3 miles) — distances are straight-line. Bristol is around 11 miles away.
Key facts for this area
- Area
- Somerset, England
- Highway authority
- North Somerset Council (local roads)
- Planning authority
- North Somerset Council
- Postcodes
- BS21
- Guide price
- Typically £245–£1,195 per bollard + VAT; minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Nailsea (4.3 mi), Portishead (4.7 mi), Weston-super-Mare (8.4 mi), Bristol (11.3 mi)
Guide prices for Clevedon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£645 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £535–£925 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £815–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where pedestrian protection bollards go in around Clevedon
Around Clevedon, pedestrian protection bollards usually solve one of these:
- School and hospital drop-off zones
- Shop entrances facing nose-in parking bays
- Drive-thru lanes and order points next to seating
Before we dig in Clevedon
In Clevedon, work on adopted pavements and verges needs consent from North Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Clevedon need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at North Somerset Council before posts go in.
Raised kerbs also change the picture: a high kerb slows a wheel but does not stop a bumper, so the post still needs to sit within reach of the overhang rather than behind it. Where bollards protect a shopfront, the building's own foundations and any canopy columns may sit close to the line, which limits how deep and wide each base can go.
- If a tested product has been requested, confirm PAS 170-1 or another stated standard and install to the tested foundation.
- Keep clear gaps of typically at least 1,000–1,200 mm and keep main walkways wide enough, referring to Inclusive Mobility guidance.
Installation, step by step
Set out the line
Posts are set out allowing for bumper overhang and keeping clear routes for pedestrians, trolleys and wheelchairs.
Excavate and set
Each position is cut, dug and checked for services, and the posts are set plumb in concrete to a consistent height.
Reinstate
Paving, tarmac or concrete is made good flush around each post, with tactile paving reinstated where it was disturbed.
Choosing the right spec
| Option | Detail |
|---|---|
| Wheel stops and kerbs | Used with bollards to stop cars before they reach the posts, reducing daily knocks. |
| Concrete-filled steel posts | Root-fixed galvanised and powder-coated steel, the standard unrated choice for walkways and frontages. |
| Visibility bands | Reflective and contrasting bands help drivers and partially sighted pedestrians see posts. |
What affects the quote
When we price pedestrian protection bollards in Clevedon, these make the biggest difference:
- Ground conditions and services along kerb lines
- Unrated steel or PAS 170-1 tested products
- Working around trading hours and live car parks
Looking after them
Protection bollards take the knocks they are there for, so inspect them regularly and after any reported strike. A post that leans or rocks has lost much of its value and should be re-bedded or replaced.
We can also service, repair or replace existing posts anywhere in Clevedon.
Pedestrian protection in Clevedon: FAQs
Which parts of Clevedon do you cover for pedestrian protection bollards?
We cover all of Clevedon (BS21) and the rest of Somerset. We also work in Nailsea, Portishead and Weston-super-Mare.
Do I need consent for pedestrian protection bollards on a public footway in Clevedon?
North Somerset Council is the highway authority covering Clevedon's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do pedestrian protection bollards cost in Clevedon?
In Clevedon, typically £245–£1,195 per bollard, supplied and installed, plus VAT, with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Should bollards be added at a drive-thru order point?
Often, yes, where people queue or sit beside the lane. Posts should follow the curve of the lane and be closest together at corners, where drivers tend to misjudge the turn. The positions are agreed on site with the operator.
Will bollards block trolleys?
They should not if gaps are planned for trolleys and wheelchairs. Main routes to trolley bays need wider openings. We set gaps to suit the way the site works.
Pedestrian protection in nearby towns
- Nailsea (4.3 mi)
- Portishead (4.7 mi)
- Weston-super-Mare (8.4 mi)
- Bristol (11.3 mi)
- Kingswood (15.1 mi)
- Burnham-on-Sea (15.3 mi)