Angus · Scotland
Ram-raid protection bollards in Montrose
Ram-raid bollards for sites across Montrose and the rest of Angus, from the first measurement to the last relaid paving block.
Computer-generated imageAbout ram-raid bollards in Montrose
Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. In Montrose, that tends to mean sites such as town-centre squares, small industrial units and community car parks.
We cover Montrose's DD10 postcode district, including places such as Hillside and Craigo. Jobs in Montrose can be combined with work in Arbroath (11.6 miles), Forfar (16.8 miles), Carnoustie (17.4 miles) and Stonehaven (19.6 miles) (straight-line distances).
Key facts for this area
- Area
- Angus, Scotland
- Roads authority
- Angus Council (local roads)
- Planning authority
- Angus Council
- Postcodes
- DD10
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
- Nearby
- Arbroath (11.6 mi), Forfar (16.8 mi), Carnoustie (17.4 mi), Stonehaven (19.6 mi)
What Montrose sites use ram-raid bollards for
Typical reasons Montrose sites choose ram-raid bollards:
- Warehouses and trade counters with roller-shutter entrances
- Filling station kiosks and forecourt shops
- Through-the-wall and freestanding ATMs
What ram-raid bollards cost in Montrose
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Montrose
In Scotland the council is the roads authority for local roads, which in Montrose means Angus Council. Ram-raid bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Montrose is listed or inside a conservation area, check with the local planning authority (Angus Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks. Deep foundations need care near the building's own footings and basement walls.
- Check who owns the ground in front of the shop; if it is public highway, the roads authority's agreement is needed.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
How the job runs
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
What moves the price in Montrose
Two Montrose jobs with the same number of posts can price quite differently. The usual reasons:
- Out-of-hours working to avoid closing the shop
- Foundation depth and what is found under the pavement
- Number of posts across the frontage or ATM
After installation
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Ram-raid bollards are robust but not maintenance-free.
For damaged or loose posts in Montrose, repairs and replacements are priced in writing first.
Ram-raid bollards in Montrose: FAQs
Can you install ram-raid bollards anywhere in Montrose?
We cover all of Montrose (DD10) and the rest of Angus. We also work in Arbroath, Forfar and Carnoustie.
Who gives permission for bollards on the pavement in Montrose?
Montrose falls under Angus Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for ram-raid bollards in Montrose?
In Montrose, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.