Angus · Scotland
Timber bollard installation in Montrose
Planning timber bollards in Montrose? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageTimber bollards in Montrose
From schools, filling-station forecourts and small industrial units, Montrose has plenty of places where timber bollards earn their keep. Oak, hardwood and treated softwood bollards for parks, verges, rural sites, car parks and school frontages.
We work across DD10 — Montrose itself and places including Hillside and Craigo. Nearby, we also work in Arbroath (11.6 miles), Forfar (16.8 miles), Carnoustie (17.4 miles) and Stonehaven (19.6 miles), measured as the crow flies.
Local details
- Area
- Angus, Scotland
- Roads authority
- Angus Council (local roads)
- Planning authority
- Angus Council
- Postcodes
- DD10
- Guide price
- Typically £95–£345 per post + VAT (£105–£405 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Arbroath (11.6 mi), Forfar (16.8 mi), Carnoustie (17.4 mi), Stonehaven (19.6 mi)
Guide prices for Montrose
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £95–£205 + VAT · £105–£245 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £175–£275 + VAT · £205–£325 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £245–£345 + VAT · £285–£405 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Montrose sites use timber bollards for
Around Montrose, timber bollards usually solve one of these:
- Footpath and bridleway entrances
- Village greens and recreation grounds
- Country parks, nature reserves and woodland car parks
Consents, ground and services in Montrose
In Scotland the council is the roads authority for local roads, which in Montrose means Angus Council. Timber bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Many private-land installations in Montrose need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Angus Council before posts go in.
Turf around new posts is reinstated and, on sites used by mowers, posts are spaced so equipment can pass. Tree roots are common along verges and parks, and digging close to mature trees can harm them, so positions are adjusted to stay outside root areas where possible.
- Leave pedestrian gaps of typically at least 1,000–1,200 mm, and wider at path entrances used by cycles, buggies and mobility scooters, referring to Inclusive Mobility guidance.
- Keep emergency vehicle access available, using a removable or hinged post where a route must open.
Installation, step by step
Survey the setting
A free site survey looks at the ground, drainage, tree roots, how vehicles currently get onto the land and how the site looks. You receive a fixed written quote with species, size and fixing.
Set out the line
Posts are set out at spacings that stop cars passing between them while leaving gaps for walkers, buggies and wheelchairs.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Choosing the right spec
| Option | Detail |
|---|---|
| Sizes and profiles | Commonly 100–200 mm square or round, with chamfered, pyramid or domed tops to shed water. |
| Tropical hardwood | Very dense and long-lasting in ground contact. Specify certified sustainable sources. |
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
Pricing timber bollards in Montrose
Two Montrose jobs with the same number of posts can price quite differently. The usual reasons:
- Post size and length
- Fixing method: stone, concrete or steel shoe
- Ground conditions, roots and services
Looking after them
Inspect posts at ground level, where rot starts, by probing for soft wood. Re-treat cut or damaged softwood, keep grass and soil from building up around the base, and replace posts that are soft at the ground line before they snap.
If posts in Montrose are later hit or damaged, we can repair or replace them — see bollard repairs.
Timber bollards in Montrose: FAQs
Do you install timber bollards in Montrose?
We cover all of Montrose (DD10) and the rest of Angus. We also work in Arbroath, Forfar and Carnoustie.
Do I need consent for timber bollards on a public footway in Montrose?
Montrose falls under Angus Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for timber bollards in Montrose?
In Montrose, typically £95–£345 per post, supplied and installed, plus VAT (£105–£405 including VAT for homeowners), with a minimum job of £445 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Is tropical hardwood a sustainable choice?
It can be, if it comes from certified sustainable sources. Ask for certification with the order. Oak and treated softwood from managed forests are alternatives.
How long will a timber bollard last in the ground?
It depends on species, treatment and how the post is set. Dense hardwoods and oak heartwood last much longer than softwood, and posts that are kept out of standing water last longer than those sitting in wet concrete. A steel shoe that keeps timber off the ground extends life considerably.