Angus · Scotland
Steel security bollard installation in Montrose
Local installation of steel security bollards in Montrose — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageMontrose steel security bollards
Whether it's high street shopfronts, schools and filling-station forecourts, steel security bollards in Montrose are planned around who needs to get through and who doesn't. Concrete-filled steel bollards, root-fixed or base-plated, for car parks, forecourts, boundaries and nuisance vehicle control.
Coverage in Montrose takes in the DD10 postcode district and nearby places like Hillside and Craigo. We also cover neighbouring Arbroath (11.6 miles), Forfar (16.8 miles), Carnoustie (17.4 miles) and Stonehaven (19.6 miles) — distances are straight-line.
Local details
- Area
- Angus, Scotland
- Roads authority
- Angus Council (local roads)
- Planning authority
- Angus Council
- Postcodes
- DD10
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Arbroath (11.6 mi), Forfar (16.8 mi), Carnoustie (17.4 mi), Stonehaven (19.6 mi)
Steel security bollard prices in Montrose
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where steel security bollards go in around Montrose
Typical reasons Montrose sites choose steel security bollards:
- Forecourts and building entrances needing a visible boundary
- Lines between pedestrian routes and service yards
- Protecting meter boxes, gas kiosks, pillars and corners
Permissions and groundwork in Montrose
For anything on the public footway in Montrose we check with the roads authority first — Angus Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
If your site in Montrose is listed or inside a conservation area, check with the local planning authority (Angus Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Service runs commonly follow kerb lines and verges, which is exactly where steel posts tend to go, so positions are checked with records and scanning before digging. Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found.
- Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
Installation, step by step
Break out and excavate
For root-fixed posts, the surface is cut neatly and each hole is dug to depth, by hand near known services. For base plates, the slab is checked for thickness and soundness.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Choosing the right spec
| Option | Detail |
|---|---|
| Concrete infill | Adds mass and stiffness and makes the post harder to cut or dent. Usually specified for security and impact positions. |
| Root-fixed | Cast into a concrete foundation, typically with several hundred millimetres of post below ground. The usual choice where digging is possible. |
| Base-plated | Bolted to a sound concrete slab with resin anchors. Quick to fit and easy to remove later, suited to light-duty and indoor use. |
What moves the price in Montrose
When we price steel security bollards in Montrose, these make the biggest difference:
- Tube diameter, wall thickness and concrete infill
- Surface reinstatement such as block paving or tarmac
- Ground conditions and buried services
After installation
Check periodically for impact damage, loose base plates and cracked surfacing around the root. Powder coat chipped by vehicles should be touched up before the galvanising underneath starts to weather.
We can also service, repair or replace existing posts anywhere in Montrose.
Steel security bollards in Montrose: FAQs
Do you install steel security bollards in Montrose?
We cover all of Montrose (DD10) and the rest of Angus. We also work in Arbroath, Forfar and Carnoustie.
Do I need consent for steel security bollards on a public footway in Montrose?
In Scotland the council is the roads authority for local roads, which in Montrose means Angus Council. Steel security bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
How much do steel security bollards cost in Montrose?
In Montrose, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What diameter of steel bollard do I need?
Match it to the job. Around 114 mm suits car park walkways and verges; 168 or 219 mm with a heavier wall suits service yards and corners that lorries pass. The survey looks at what is likely to hit the posts.
Should I choose root-fixed or base-plated steel bollards?
Root-fixed where you can dig and want the stronger post; base-plated where there is a sound slab and you want quick installation or the option to remove posts later. Base plates are limited by the slab and anchors, so they are not the right choice where vehicles hit hard.