Bollard Installers

Buckinghamshire · England

Ram-raid protection bollards in Amersham

Ram-raid bollards for sites across Amersham and the rest of Buckinghamshire, from the first measurement to the last relaid paving block.

Stainless steel bollards protecting the glazed front of a convenience store on a terraced street at nightComputer-generated image

Amersham ram-raid bollards

In the town of Amersham, ram-raid bollards tend to go in at filling-station forecourts, community car parks and high street shopfronts. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.

We work across HP7, HP6 and HP16 — Amersham itself and places including Little Chalfont, Winchmore Hill, Penn Street and Mop End. Jobs in Amersham can be combined with work in Chesham (2.4 miles), Chalfont St Peter (4.8 miles), Gerrards Cross (6.2 miles) and High Wycombe (6.3 miles) (straight-line distances). Luton is around 17 miles away.

Amersham at a glance

Area
Buckinghamshire, England
Highway authority
Buckinghamshire Council (local roads)
Planning authority
Buckinghamshire Council
Postcodes
HP7, HP6 and HP16
Guide price
Typically £415–£1,595 per bollard + VAT; minimum job £995
Survey
Free, with a fixed written quote
Nearby
Chesham (2.4 mi), Chalfont St Peter (4.8 mi), Gerrards Cross (6.2 mi), High Wycombe (6.3 mi)

Guide prices for Amersham

SpecificationGuide priceIncludes
Standard£415–£905 + VATStandard post, foundation, reinstatement
Upgraded£765–£1,245 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£1,095–£1,595 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.

What Amersham sites use ram-raid bollards for

Around Amersham, ram-raid bollards usually solve one of these:

  • Warehouses and trade counters with roller-shutter entrances
  • Jewellers, pawnbrokers and phone shops holding high-value stock
  • Convenience stores and off-licences with glazed frontages

Consents, ground and services in Amersham

The highway authority for local roads in Amersham is Buckinghamshire Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Buckinghamshire Council) first — we flag this at survey.

We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Deep foundations need care near the building's own footings and basement walls.

  • Ask your landlord, and check any lease restrictions on alterations to the frontage.
  • Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.

What happens on site

Look at how a vehicle would approach

At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.

Agree the post type and positions

We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.

Arrange consents

If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.

Options to consider

OptionDetail
PAS 170-1 tested bollardsTested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested.
Stainless or decorative coversCovers over steel cores for shopping streets and branded frontages where plain steel would look out of place.
Concrete-filled steel postsThick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs.

What moves the price in Amersham

Our South East guide prices are a starting point; the survey in Amersham firms them up. What tends to move them:

  • Reinstatement of forecourt or natural stone surfaces
  • Covers and finishes for shopping streets
  • Foundation depth and what is found under the pavement

After installation

If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.

For damaged or loose posts in Amersham, repairs and replacements are priced in writing first.

Ram-raid bollards in Amersham: FAQs

Do you install ram-raid bollards in Amersham?

We cover all of Amersham (HP7, HP6 and HP16) and the rest of Buckinghamshire. We also work in Chesham, Chalfont St Peter and Gerrards Cross.

Who gives permission for bollards on the pavement in Amersham?

Buckinghamshire Council is the highway authority covering Amersham's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

How much do ram-raid bollards cost in Amersham?

In Amersham, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.

How many bollards does a shopfront need?

Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.

What is PAS 170-1 and do I need it?

PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.

Ram-raid bollards in nearby towns

More from us in Amersham

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote