Cheshire · England
Ram-raid protection bollards in Crewe
Ram-raid bollards for sites across Crewe and the rest of Cheshire, from the first measurement to the last relaid paving block.
Computer-generated imageRam-raid bollards in Crewe
From business parks, leisure centres and retail parks, Crewe has plenty of places where ram-raid bollards earn their keep. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Crewe takes in the CW1, CW2, CW5 and CW11 postcode districts and nearby places like Haslington, Winterley, Coppenhall Moss and Bradfield Green. Nearby, we also work in Winsford (7.3 miles), Kidsgrove (8.5 miles), Congleton (10.5 miles) and Newcastle-under-Lyme (11 miles), measured as the crow flies. Stoke-on-Trent is around 12 miles away.
Key facts for this area
- Area
- Cheshire, England
- Highway authority
- Cheshire East Council (local roads)
- Planning authority
- Cheshire East Council
- Postcodes
- CW1, CW2, CW5 and CW11
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £925
- Survey
- Free, with a fixed written quote
- Nearby
- Winsford (7.3 mi), Kidsgrove (8.5 mi), Congleton (10.5 mi), Newcastle-under-Lyme (11 mi)
Where ram-raid bollards go in around Crewe
Around Crewe, ram-raid bollards usually solve one of these:
- Pharmacies and late-opening premises
- Convenience stores and off-licences with glazed frontages
- Jewellers, pawnbrokers and phone shops holding high-value stock
What ram-raid bollards cost in Crewe
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £715–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Consents, ground and services in Crewe
The highway authority for local roads in Crewe is Cheshire East Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Cheshire East Council) first — we flag this at survey.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
From survey to handover
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Options to consider
| Option | Detail |
|---|---|
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
What moves the price in Crewe
Two Crewe jobs with the same number of posts can price quite differently. The usual reasons:
- Foundation depth and what is found under the pavement
- Out-of-hours working to avoid closing the shop
- Removable positions and their locks
Looking after them
Ram-raid bollards are robust but not maintenance-free. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.
If posts in Crewe are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about ram-raid bollards in Crewe
Can you install ram-raid bollards anywhere in Crewe?
We cover all of Crewe (CW1, CW2, CW5 and CW11) and the rest of Cheshire. We also work in Winsford, Kidsgrove and Congleton.
Who gives permission for bollards on the pavement in Crewe?
The highway authority for local roads in Crewe is Cheshire East Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do ram-raid bollards cost in Crewe?
In Crewe, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £925 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Ram-raid bollards in nearby towns
- Winsford (7.3 mi)
- Kidsgrove (8.5 mi)
- Congleton (10.5 mi)
- Newcastle-under-Lyme (11 mi)
- Northwich (11.6 mi)
- Stoke-on-Trent (12.5 mi)