Bollard Installers

Cheshire · England

Ram-raid protection bollards in Winsford

Ram-raid bollards supplied and fitted in Winsford, Cheshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.

Stainless steel bollards protecting the glazed front of a convenience store on a terraced street at nightComputer-generated image

Winsford ram-raid bollards

Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. In Winsford, that tends to mean sites such as schools, small industrial units and filling-station forecourts.

We cover Winsford's CW7 postcode district, including places such as Salterswall, Meadowbank and Clive Green. Nearby, we also work in Northwich (4.7 miles), Crewe (7.3 miles), Congleton (13 miles) and Runcorn (13.5 miles), measured as the crow flies. Stoke-on-Trent is around 19 miles away.

Winsford at a glance

Area
Cheshire, England
Highway authority
Cheshire West and Chester Council (local roads)
Planning authority
Cheshire West and Chester Council
Postcodes
CW7
Guide price
Typically £385–£1,445 per bollard + VAT; minimum job £925
Survey
Free, with a fixed written quote
Nearby
Northwich (4.7 mi), Crewe (7.3 mi), Congleton (13 mi), Runcorn (13.5 mi)

Where ram-raid bollards go in around Winsford

Typical reasons Winsford sites choose ram-raid bollards:

  • Jewellers, pawnbrokers and phone shops holding high-value stock
  • Convenience stores and off-licences with glazed frontages
  • Warehouses and trade counters with roller-shutter entrances

Winsford: typical ram-raid bollard prices

SpecificationGuide priceIncludes
Standard£385–£835 + VATStandard post, foundation, reinstatement
Upgraded£715–£1,145 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£1,045–£1,445 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.

Before we dig in Winsford

The highway authority for local roads in Winsford is Cheshire West and Chester Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

If your site in Winsford is listed or inside a conservation area, check with the local planning authority (Cheshire West and Chester Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.

Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.

  • Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
  • In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.

Installation, step by step

Look at how a vehicle would approach

At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.

Agree the post type and positions

We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.

Excavate and set the posts

Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.

Specification choices

OptionDetail
PAS 170-1 tested bollardsTested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested.
Reflective and contrasting bandsBands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement.
Removable postsLockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently.

Pricing ram-raid bollards in Winsford

Two Winsford jobs with the same number of posts can price quite differently. The usual reasons:

  • Removable positions and their locks
  • Foundation depth and what is found under the pavement
  • Out-of-hours working to avoid closing the shop

After installation

If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.

We can also service, repair or replace existing posts anywhere in Winsford.

Questions about ram-raid bollards in Winsford

Which parts of Winsford do you cover for ram-raid bollards?

We cover all of Winsford (CW7) and the rest of Cheshire. We also work in Northwich, Crewe and Congleton.

Who gives permission for bollards on the pavement in Winsford?

The highway authority for local roads in Winsford is Cheshire West and Chester Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.

How much do ram-raid bollards cost in Winsford?

In Winsford, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £925 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.

What is PAS 170-1 and do I need it?

PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.

Can we still take deliveries through the front?

Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.

Ram-raid bollards in nearby towns

Other bollard services in Winsford

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote