City of Edinburgh · Scotland
Ram-raid protection bollards in South Queensferry
Ram-raid bollards supplied and fitted in South Queensferry, City of Edinburgh: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageSouth Queensferry ram-raid bollards
Ram-raid bollards suit plenty of South Queensferry sites, schools, small industrial units and high street shopfronts among them. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in South Queensferry takes in the EH30, EH29 and EH28 postcode districts and nearby places like Kirkliston, Ratho and Ingliston. We also cover neighbouring Broxburn (4.8 miles), Livingston (7.7 miles), Linlithgow (8 miles) and Edinburgh (8.3 miles) — distances are straight-line. Edinburgh is around 8 miles away.
South Queensferry at a glance
- Area
- City of Edinburgh, Scotland
- Roads authority
- City of Edinburgh Council (local roads)
- Planning authority
- City of Edinburgh Council
- Postcodes
- EH30, EH29 and EH28
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
- Nearby
- Broxburn (4.8 mi), Livingston (7.7 mi), Linlithgow (8 mi), Edinburgh (8.3 mi)
What ram-raid bollards cost in South Queensferry
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Ram-raid bollards in South Queensferry: common uses
Around South Queensferry, ram-raid bollards usually solve one of these:
- Convenience stores and off-licences with glazed frontages
- Pharmacies and late-opening premises
- Filling station kiosks and forecourt shops
Before we dig in South Queensferry
For anything on the public footway in South Queensferry we check with the roads authority first — City of Edinburgh Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Many private-land installations in South Queensferry need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at City of Edinburgh Council before posts go in.
Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Check who owns the ground in front of the shop; if it is public highway, the roads authority's agreement is needed.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
What happens on site
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
Pricing ram-raid bollards in South Queensferry
When we price ram-raid bollards in South Queensferry, these make the biggest difference:
- Unrated, PAS 170-1 or crash-rated product
- Reinstatement of forecourt or natural stone surfaces
- Foundation depth and what is found under the pavement
After installation
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Ram-raid bollards are robust but not maintenance-free.
We can also service, repair or replace existing posts anywhere in South Queensferry.
Questions about ram-raid bollards in South Queensferry
Can you install ram-raid bollards anywhere in South Queensferry?
We cover all of South Queensferry (EH30, EH29 and EH28) and the rest of City of Edinburgh. We also work in Broxburn, Livingston and Linlithgow.
Who gives permission for bollards on the pavement in South Queensferry?
In Scotland the council is the roads authority for local roads, which in South Queensferry means City of Edinburgh Council. Ram-raid bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
How much do ram-raid bollards cost in South Queensferry?
In South Queensferry, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Can we still take deliveries through the front?
Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.
Ram-raid bollards near South Queensferry
- Broxburn (4.8 mi)
- Livingston (7.7 mi)
- Linlithgow (8 mi)
- Edinburgh (8.3 mi)
- Bo'ness (8.6 mi)
- Bathgate (11.3 mi)