Conwy · Wales
Ram-raid protection bollards in Colwyn Bay
Local installation of ram-raid bollards in Colwyn Bay — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout ram-raid bollards in Colwyn Bay
We supply and fit ram-raid bollards throughout Colwyn Bay, typically for sites such as town-centre squares, filling-station forecourts and schools. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover Colwyn Bay's LL29 and LL28 postcode districts, including places such as Mynydd Marian, Llysfaen, Llansanffraid Glan Conwy and Eglwysbach. Jobs in Colwyn Bay can be combined with work in Llandudno (4.8 miles), Abergele (6 miles), Rhyl (9.8 miles) and Prestatyn (13.5 miles) (straight-line distances).
Key facts for this area
- Area
- Conwy, Wales
- Highway authority
- Conwy County Borough Council (local roads)
- Planning authority
- Conwy County Borough Council
- Postcodes
- LL29 and LL28
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £915
- Survey
- Free, with a fixed written quote
Ram-raid bollard prices in Colwyn Bay
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £705–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Ram-raid bollards in Colwyn Bay: common uses
Typical reasons Colwyn Bay sites choose ram-raid bollards:
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Through-the-wall and freestanding ATMs
- Warehouses and trade counters with roller-shutter entrances
What we check first in Colwyn Bay
In Colwyn Bay the highway authority for local roads is Conwy County Borough Council. We confirm whether the ground is adopted highway before quoting, because ram-raid bollards on a public footway need its agreement first.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Conwy County Borough Council) first — we flag this at survey.
Deep foundations need care near the building's own footings and basement walls. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
How the job runs
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
What moves the price in Colwyn Bay
When we price ram-raid bollards in Colwyn Bay, these make the biggest difference:
- Covers and finishes for shopping streets
- Out-of-hours working to avoid closing the shop
- Removable positions and their locks
After installation
Ram-raid bollards are robust but not maintenance-free. If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point.
If posts in Colwyn Bay are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about ram-raid bollards in Colwyn Bay
Do you install ram-raid bollards in Colwyn Bay?
We cover all of Colwyn Bay (LL29 and LL28) and the rest of Conwy. We also work in Llandudno, Abergele and Rhyl.
Do I need consent for ram-raid bollards on a public footway in Colwyn Bay?
Before digging near the kerb in Colwyn Bay we establish who owns the ground: adopted footways are Conwy County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
How much do ram-raid bollards cost in Colwyn Bay?
In Colwyn Bay, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £915 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.