Wales · 3 towns
Ram-raid protection bollards in Conwy
Ram-raid bollards for sites across Conwy: surveyed, quoted in writing and installed by our crews.
Computer-generated imageRam-raid bollards in Conwy
We supply and install ram-raid bollards across Conwy, with local pages for 3 towns below. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Highway authorities for local roads in Conwy: Conwy County Borough Council.
Choose your town in Conwy
Guide prices in Conwy
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £705–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Highway and planning authorities in Conwy
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Colwyn Bay | Conwy County Borough Council | Conwy County Borough Council |
| Llandudno | Conwy County Borough Council | Conwy County Borough Council |
| Abergele | Conwy County Borough Council | Conwy County Borough Council |
Rules for ram-raid bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Wales.
How installation works
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Ram-raid bollards in Conwy: FAQs
Do you cover all of Conwy for ram-raid bollards?
Yes — including Colwyn Bay, Llandudno and Abergele. Enter your postcode in the price calculator to confirm.
How much do ram-raid bollards cost in Conwy?
In Conwy, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £915 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Conwy?
For local roads, Conwy County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
Can we still take deliveries through the front?
Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.