Fife · Scotland
Ram-raid protection bollards in Rosyth
Planning ram-raid bollards in Rosyth? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageRosyth ram-raid bollards
In the town of Rosyth, ram-raid bollards tend to go in at high street shopfronts, community car parks and schools. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Rosyth takes in the KY11 postcode district and nearby places like Dalgety Bay, Inverkeithing, Limekilns and North Queensferry. We also cover neighbouring Dunfermline (2.5 miles), Cowdenbeath (6.3 miles), Kirkcaldy (12.1 miles) and Alloa (14.6 miles) — distances are straight-line.
Local details
- Area
- Fife, Scotland
- Roads authority
- Fife Council (local roads)
- Planning authority
- Fife Council
- Postcodes
- KY11
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
- Nearby
- Dunfermline (2.5 mi), Cowdenbeath (6.3 mi), Kirkcaldy (12.1 mi), Alloa (14.6 mi)
Where ram-raid bollards go in around Rosyth
Typical reasons Rosyth sites choose ram-raid bollards:
- Warehouses and trade counters with roller-shutter entrances
- Filling station kiosks and forecourt shops
- Pharmacies and late-opening premises
Guide prices for Rosyth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Rosyth
In Scotland the council is the roads authority for local roads, which in Rosyth means Fife Council. Ram-raid bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Many private-land installations in Rosyth need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Fife Council before posts go in.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Check who owns the ground in front of the shop; if it is public highway, the roads authority's agreement is needed.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
How the job runs
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Specification choices
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
What moves the price in Rosyth
When we price ram-raid bollards in Rosyth, these make the biggest difference:
- Reinstatement of forecourt or natural stone surfaces
- Unrated, PAS 170-1 or crash-rated product
- Foundation depth and what is found under the pavement
Looking after them
Ram-raid bollards are robust but not maintenance-free. If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point.
We can also service, repair or replace existing posts anywhere in Rosyth.
Common questions
Which parts of Rosyth do you cover for ram-raid bollards?
We cover all of Rosyth (KY11) and the rest of Fife. We also work in Dunfermline, Cowdenbeath and Kirkcaldy.
Do I need consent for ram-raid bollards on a public footway in Rosyth?
In Scotland the council is the roads authority for local roads, which in Rosyth means Fife Council. Ram-raid bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for ram-raid bollards in Rosyth?
In Rosyth, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Ram-raid bollards in nearby towns
- Dunfermline (2.5 mi)
- Cowdenbeath (6.3 mi)
- Kirkcaldy (12.1 mi)
- Alloa (14.6 mi)
- Glenrothes (15 mi)
- Tullibody (16.8 mi)