Oxfordshire · England
Ram-raid protection bollards in Bicester
Local installation of ram-raid bollards in Bicester — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageBicester ram-raid bollards
In the town of Bicester, ram-raid bollards tend to go in at community car parks, schools and small industrial units. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We work across OX26, OX27 and OX25 — Bicester itself and places including Launton, Caversfield, Fritwell and Fringford. Nearby, we also work in Oxford (11.1 miles), Banbury (13.8 miles), Aylesbury (15.6 miles) and Witney (16.3 miles), measured as the crow flies. It sits roughly 20 miles from Milton Keynes as the crow flies.
Key facts for this area
- Area
- Oxfordshire, England
- Highway authority
- Oxfordshire County Council (local roads)
- Planning authority
- the council for Cherwell
- Postcodes
- OX26, OX27 and OX25
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
What Bicester sites use ram-raid bollards for
Common uses in a place like Bicester:
- Pharmacies and late-opening premises
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Warehouses and trade counters with roller-shutter entrances
Ram-raid bollard prices in Bicester
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Bicester
In Bicester, work on adopted pavements and verges needs consent from Oxfordshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Cherwell) first — we flag this at survey.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
From survey to handover
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
What moves the price in Bicester
Our South East guide prices are a starting point; the survey in Bicester firms them up. What tends to move them:
- Removable positions and their locks
- Reinstatement of forecourt or natural stone surfaces
- Covers and finishes for shopping streets
Keeping them working
Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.
If posts in Bicester are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install ram-raid bollards in Bicester?
We cover all of Bicester (OX26, OX27 and OX25) and the rest of Oxfordshire. We also work in Oxford, Banbury and Aylesbury.
Do I need consent for ram-raid bollards on a public footway in Bicester?
Oxfordshire County Council is the highway authority covering Bicester's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for ram-raid bollards in Bicester?
In Bicester, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Ram-raid bollards near Bicester
- Oxford (11.1 mi)
- Banbury (13.8 mi)
- Aylesbury (15.6 mi)
- Witney (16.3 mi)
- Abingdon (16.8 mi)
- Bletchley (19 mi)