England · 6 towns
Ram-raid protection bollards in Oxfordshire
Ram-raid bollards for sites across Oxfordshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageRam-raid bollards in Oxfordshire
Across Oxfordshire, typical sites for ram-raid bollards include stadium approaches, university campuses and retail parks. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Highway authorities for local roads in Oxfordshire: Oxfordshire County Council.
Choose your town in Oxfordshire
Guide prices in Oxfordshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Local authorities across Oxfordshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Oxford | Oxfordshire County Council | Oxfordshire County Council |
| Banbury | Oxfordshire County Council | the council for Cherwell |
| Abingdon | Oxfordshire County Council | the council for Vale of White Horse |
| Bicester | Oxfordshire County Council | the council for Cherwell |
| Didcot | Oxfordshire County Council | the council for South Oxfordshire |
| Witney | Oxfordshire County Council | the council for West Oxfordshire |
Rules for ram-raid bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in England.
How installation works
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Ram-raid bollards in Oxfordshire: FAQs
Do you cover all of Oxfordshire for ram-raid bollards?
Yes — including Oxford, Banbury, Abingdon, Bicester, Didcot and Witney. Enter your postcode in the price calculator to confirm.
How much do ram-raid bollards cost in Oxfordshire?
In Oxfordshire, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Oxfordshire?
For local roads, Oxfordshire County Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.