West Sussex · England
Ram-raid protection bollards in Burgess Hill
Ram-raid bollards for sites across Burgess Hill and the rest of West Sussex, from the first measurement to the last relaid paving block.
Computer-generated imageBurgess Hill ram-raid bollards
Across Burgess Hill, typical sites for ram-raid bollards include small industrial units, high street shopfronts and schools. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover Burgess Hill's RH15, BN6 and BN45 postcode districts, including places such as Abbotsford, Hurstpierpoint, Hassocks and Keymer. Jobs in Burgess Hill can be combined with work in Haywards Heath (3 miles), Portslade (8.8 miles), Hove (8.9 miles) and Brighton (9 miles) (straight-line distances). It sits roughly 9 miles from Brighton as the crow flies.
Key facts for this area
- Area
- West Sussex, England
- Highway authority
- West Sussex County Council (local roads)
- Planning authority
- the council for Mid Sussex
- Postcodes
- RH15, BN6 and BN45
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
- Nearby
- Haywards Heath (3 mi), Portslade (8.8 mi), Hove (8.9 mi), Brighton (9 mi)
Typical ram-raid bollards jobs in Burgess Hill
Around Burgess Hill, ram-raid bollards usually solve one of these:
- Premises that have already been targeted once
- Convenience stores and off-licences with glazed frontages
- Through-the-wall and freestanding ATMs
Ram-raid bollard prices in Burgess Hill
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Burgess Hill
West Sussex County Council is the highway authority covering Burgess Hill's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Burgess Hill need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Mid Sussex before posts go in.
Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks. Deep foundations need care near the building's own footings and basement walls.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
Installation, step by step
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
What moves the price in Burgess Hill
Two Burgess Hill jobs with the same number of posts can price quite differently. The usual reasons:
- Covers and finishes for shopping streets
- Foundation depth and what is found under the pavement
- Unrated, PAS 170-1 or crash-rated product
Keeping them working
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
If posts in Burgess Hill are later hit or damaged, we can repair or replace them — see bollard repairs.
Ram-raid bollards in Burgess Hill: FAQs
Do you install ram-raid bollards in Burgess Hill?
We cover all of Burgess Hill (RH15, BN6 and BN45) and the rest of West Sussex. We also work in Haywards Heath, Portslade and Hove.
Do I need consent for ram-raid bollards on a public footway in Burgess Hill?
The highway authority for local roads in Burgess Hill is West Sussex County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for ram-raid bollards in Burgess Hill?
In Burgess Hill, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Ram-raid bollards near Burgess Hill
- Haywards Heath (3 mi)
- Portslade (8.8 mi)
- Hove (8.9 mi)
- Brighton (9 mi)
- Rottingdean (10.8 mi)
- Crawley (10.9 mi)