Devon · England
Removable bollard installation in Tiverton
Planning removable bollards in Tiverton? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageRemovable bollards in Tiverton
Lift-out bollards in lockable ground sockets for driveways, delivery routes, access roads and emergency access points. In Tiverton, that tends to mean sites such as high street shopfronts, community car parks and community buildings.
Coverage in Tiverton takes in the EX16 postcode district and nearby places like Sampford Peverell, Witheridge, Halberton and Oakford. Nearby, we also work in Exeter (12.4 miles), Taunton (18.6 miles) and Exmouth (20.1 miles), measured as the crow flies.
Tiverton at a glance
- Area
- Devon, England
- Highway authority
- Devon County Council (local roads)
- Planning authority
- the council for Mid Devon
- Postcodes
- EX16
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
Tiverton: typical removable bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where removable bollards go in around Tiverton
Typical reasons Tiverton sites choose removable bollards:
- School gates closed during drop-off and pick-up
- Driveways and private parking bays
- Maintenance tracks through parks and open spaces
What we check first in Tiverton
The highway authority for local roads in Tiverton is Devon County Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Tiverton is listed or inside a conservation area, check with the local planning authority (the council for Mid Devon) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly. Removable bollards need modest depth, which makes them one of the easier bollards to fit around services.
- Fit reflective or contrasting bands near the top so posts are visible when in place.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
How the job runs
Agree who will lift the post
At the free site survey we talk through who will remove the post, how often and where it will be stored. That decides material, diameter and lock, and goes into a fixed written quote.
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Set the socket flush
The socket is set in concrete with its rim exactly at finished surface level and to the fall of the ground, so the lid sits flat and nothing catches on it.
Finishes and options
| Option | Detail |
|---|---|
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Heads and handles | Dome, flat or ball heads, with lifting handles or eyes so posts can be pulled out without strain. |
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
What affects the quote
Our South West guide prices are a starting point; the survey in Tiverton firms them up. What tends to move them:
- Post material: steel, stainless or aluminium
- Lock type and whether locks are keyed alike
- Number of posts and sockets
After installation
Check the lid springs and hinges. Removable bollards fail in predictable ways: seized locks, sockets full of grit and lids that no longer close.
For damaged or loose posts in Tiverton, repairs and replacements are priced in writing first.
Questions about removable bollards in Tiverton
Do you install removable bollards in Tiverton?
We cover all of Tiverton (EX16) and the rest of Devon. We also work in Exeter, Taunton and Exmouth.
Who gives permission for bollards on the pavement in Tiverton?
The highway authority for local roads in Tiverton is Devon County Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do removable bollards cost in Tiverton?
In Tiverton, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
How heavy is a removable bollard to lift?
It depends on material and size; a slim aluminium post is easy to lift, while a large concrete-filled steel post is not designed for daily handling. If the post will come out every day, say so at the survey and we will suggest something lighter with a handle.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.