Devon · England
Telescopic bollard installation in Tiverton
Telescopic bollards for sites across Tiverton and the rest of Devon, from the first measurement to the last relaid paving block.
Computer-generated imageAbout telescopic bollards in Tiverton
Telescopic bollards suit plenty of Tiverton sites, filling-station forecourts, residential driveways and high street shopfronts among them. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We cover Tiverton's EX16 postcode district, including places such as Sampford Peverell, Witheridge, Halberton and Oakford. Nearby, we also work in Exeter (12.4 miles), Taunton (18.6 miles) and Exmouth (20.1 miles), measured as the crow flies.
Key facts for this area
- Area
- Devon, England
- Highway authority
- Devon County Council (local roads)
- Planning authority
- the council for Mid Devon
- Postcodes
- EX16
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
Telescopic bollards in Tiverton: common uses
Common uses in a place like Tiverton:
- Car parks where a removable post would go missing
- Commercial yards where posts must not be left lying around
- Sites with no power for automatic bollards
Guide prices for Tiverton
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Tiverton
The highway authority for local roads in Tiverton is Devon County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Tiverton is listed or inside a conservation area, check with the local planning authority (the council for Mid Devon) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Positions are scanned and hand-dug before committing. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
How the job runs
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
Pricing telescopic bollards in Tiverton
When we price telescopic bollards in Tiverton, these make the biggest difference:
- Excavation depth and the presence of services under the drive
- Number of posts and keyed-alike locks
- Drainage: simple soakaway or a connection to a drain
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
If posts in Tiverton are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Tiverton do you cover for telescopic bollards?
We cover all of Tiverton (EX16) and the rest of Devon. We also work in Exeter, Taunton and Exmouth.
Who gives permission for bollards on the pavement in Tiverton?
Devon County Council is the highway authority covering Tiverton's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Tiverton?
In Tiverton, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.