Devon · England
Telescopic bollard installation in Exeter
Telescopic bollards supplied and fitted in Exeter, Devon: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageTelescopic bollards in Exeter
In the city of Exeter, telescopic bollards tend to go in at business parks, retail parks and supermarket frontages. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Exeter takes in the EX4, EX2, EX1 and EX3 postcode districts and nearby places like Nadderwater, Topsham, Ide and West Clyst. Jobs in Exeter can be combined with work in Exmouth (9.2 miles), Tiverton (12.4 miles), Newton Abbot (14 miles) and Torquay (18.1 miles) (straight-line distances). Plymouth is around 36 miles away.
Exeter at a glance
- Area
- Devon, England
- Highway authority
- Devon County Council (local roads)
- Planning authority
- the council for Exeter
- Postcodes
- EX4, EX2, EX1 and EX3
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Exmouth (9.2 mi), Tiverton (12.4 mi), Newton Abbot (14 mi), Torquay (18.1 mi)
Telescopic bollards in Exeter: common uses
Typical reasons Exeter sites choose telescopic bollards:
- Commercial yards where posts must not be left lying around
- Car parks where a removable post would go missing
- Access roads closed outside working hours
What telescopic bollards cost in Exeter
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Exeter
The highway authority for local roads in Exeter is Devon County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Exeter is listed or inside a conservation area, check with the local planning authority (the council for Exeter) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- If the drive is shared, agree positions and keys with the other users first.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
How the job runs
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
What moves the price in Exeter
Two Exeter jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts and keyed-alike locks
- Stainless or powder-coated finish
- Excavation depth and the presence of services under the drive
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
For damaged or loose posts in Exeter, repairs and replacements are priced in writing first.
Questions about telescopic bollards in Exeter
Which parts of Exeter do you cover for telescopic bollards?
We cover all of Exeter (EX4, EX2, EX1 and EX3) and the rest of Devon. We also work in Exmouth, Tiverton and Newton Abbot.
Do I need consent for telescopic bollards on a public footway in Exeter?
In Exeter, work on adopted pavements and verges needs consent from Devon County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for telescopic bollards in Exeter?
In Exeter, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.