Devon · England
Telescopic bollard installation in Torquay
Telescopic bollards for sites across Torquay and the rest of Devon, from the first measurement to the last relaid paving block.
Computer-generated imageAbout telescopic bollards in Torquay
In the town of Torquay, telescopic bollards tend to go in at schools, community car parks and high street shopfronts. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We cover the TQ1 and TQ2 postcode districts in Torquay. We also cover neighbouring Paignton (2.6 miles), Newton Abbot (6 miles), Exmouth (12 miles) and Exeter (18.1 miles) — distances are straight-line. Plymouth is around 28 miles away.
Local details
- Area
- Devon, England
- Highway authority
- Torbay Council (local roads)
- Planning authority
- Torbay Council
- Postcodes
- TQ1 and TQ2
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Paignton (2.6 mi), Newton Abbot (6 mi), Exmouth (12 mi), Exeter (18.1 mi)
What telescopic bollards cost in Torquay
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Telescopic bollards in Torquay: common uses
Typical reasons Torquay sites choose telescopic bollards:
- Sites with no power for automatic bollards
- Domestic driveways where the bollard is used daily
- Commercial yards where posts must not be left lying around
Consents, ground and services in Torquay
The highway authority for local roads in Torquay is Torbay Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Torquay is listed or inside a conservation area, check with the local planning authority (Torbay Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Positions are scanned and hand-dug before committing. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- If the drive is shared, agree positions and keys with the other users first.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Specification choices
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
Pricing telescopic bollards in Torquay
Two Torquay jobs with the same number of posts can price quite differently. The usual reasons:
- Stainless or powder-coated finish
- Post size and whether lift assistance is wanted
- Drainage: simple soakaway or a connection to a drain
Looking after them
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lubricate the lock with a suitable spray, especially before winter.
We can also service, repair or replace existing posts anywhere in Torquay.
Questions about telescopic bollards in Torquay
Can you install telescopic bollards anywhere in Torquay?
We cover all of Torquay (TQ1 and TQ2) and the rest of Devon. We also work in Paignton, Newton Abbot and Exmouth.
Who gives permission for bollards on the pavement in Torquay?
Torbay Council is the highway authority covering Torquay's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do telescopic bollards cost in Torquay?
In Torquay, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.