Devon · England
Cast iron and heritage bollards in Tiverton
Cast iron bollards supplied and fitted in Tiverton, Devon: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageTiverton cast iron bollards
In the town of Tiverton, cast iron bollards tend to go in at community car parks, filling-station forecourts and high street shopfronts. Traditional cast and ductile iron bollards for conservation areas, period streets and historic estates, installed and reset.
Coverage in Tiverton takes in the EX16 postcode district and nearby places like Sampford Peverell, Witheridge, Halberton and Oakford. Nearby, we also work in Exeter (12.4 miles), Taunton (18.6 miles) and Exmouth (20.1 miles), measured as the crow flies.
Local details
- Area
- Devon, England
- Highway authority
- Devon County Council (local roads)
- Planning authority
- the council for Mid Devon
- Postcodes
- EX16
- Guide price
- Typically £445–£1,695 per bollard + VAT (£525–£2,045 inc VAT for homes); minimum job £745
- Survey
- Free, with a fixed written quote
Tiverton: typical cast iron bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £445–£975 + VAT · £525–£1,145 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £825–£1,345 + VAT · £985–£1,595 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,195–£1,695 + VAT · £1,445–£2,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where cast iron bollards go in around Tiverton
Typical reasons Tiverton sites choose cast iron bollards:
- Heritage-style covers over modern steel or tested cores
- Conservation areas and historic town centres
- Cathedral closes, college courts and historic estates
What we check first in Tiverton
The highway authority for local roads in Tiverton is Devon County Council; motorways and trunk roads sit with National Highways. Cast iron bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Tiverton is listed or inside a conservation area, check with the local planning authority (the council for Mid Devon) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Historic streets were built in layers: modern services sit over older drains, coal holes and sometimes vaults, and the paving may be natural stone on a lime or sand bed rather than concrete. Excavation is by hand, positions are checked against service records and scanning, and anything unexpected is recorded rather than broken through.
- Ask the local planning authority whether consent is needed for new or replacement bollards in a conservation area or near a listed building.
- Agree contrasting paint details with the conservation officer so posts remain visible to partially sighted people, in line with Inclusive Mobility guidance.
Installation, step by step
Agree pattern and approvals
We source a matching pattern or close equivalent and, where needed, provide details for the conservation officer or planning authority before ordering.
Lift paving carefully
Natural stone flags, setts and kerbs are lifted by hand, numbered where needed and stored for relaying.
Relay and finish
Stone is relaid in its original pattern with suitable mortar, and the bollard is painted or touched up after fixing.
Options to consider
| Option | Detail |
|---|---|
| Cast aluminium | Lighter and easier to handle, with traditional patterns, but less robust and not always accepted in sensitive settings. |
| Ductile iron | Same patterns with much greater toughness; bends before it breaks. The usual choice for new posts on trafficked streets. |
| Contrast details | Painted bands or contrasting caps agreed with the conservation officer so posts are visible to partially sighted people. |
What moves the price in Tiverton
Our South West guide prices are a starting point; the survey in Tiverton firms them up. What tends to move them:
- Pattern complexity and whether a special casting is needed
- Steel cores, concrete fill or tested cores beneath covers
- Painting, highlights and crest details
Keeping them working
Keep a record of patterns and suppliers so that future replacements match; some patterns are made in small runs and can take time to source. Grey iron that has been struck should be checked closely for hairline cracks, which can spread with frost.
We can also service, repair or replace existing posts anywhere in Tiverton.
Cast iron bollards in Tiverton: FAQs
Do you install cast iron bollards in Tiverton?
We cover all of Tiverton (EX16) and the rest of Devon. We also work in Exeter, Taunton and Exmouth.
Who gives permission for bollards on the pavement in Tiverton?
In Tiverton, work on adopted pavements and verges needs consent from Devon County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do cast iron bollards cost in Tiverton?
In Tiverton, typically £445–£1,695 per bollard, supplied and installed, plus VAT (£525–£2,045 including VAT for homeowners), with a minimum job of £745 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can an old cast iron bollard be repaired?
Usually, if it is tilted, loose or has damaged paint: it can be lifted, cleaned, reset on a new foundation and repainted. Cracked grey iron is harder to repair and may need specialist work or a matching replacement.
What colour should cast iron bollards be painted?
Black is the traditional choice in many places, sometimes with gold or white highlights on bands or crests. Some areas have their own historic colours. The conservation officer can confirm what suits the street.