Greater Manchester · England
Removable bollard installation in Eccles
Removable bollards for sites across Eccles and the rest of Greater Manchester, from the first measurement to the last relaid paving block.
Computer-generated imageAbout removable bollards in Eccles
Removable bollards suit plenty of Eccles sites, small industrial units, filling-station forecourts and high street shopfronts among them. Removable bollards are used where vehicles need occasional rather than daily access.
Coverage in Eccles takes in the M30 and M44 postcode districts and nearby places like Irlam. Nearby, we also work in Swinton (1.3 miles), Salford (1.8 miles), Stretford (2.4 miles) and Urmston (2.6 miles), measured as the crow flies. Eccles is about 4 miles from Manchester.
Local details
- Area
- Greater Manchester, England
- Highway authority
- Salford City Council (local roads)
- Planning authority
- Salford City Council
- Postcodes
- M30 and M44
- Guide price
- Typically £245–£825 per bollard + VAT (£285–£985 inc VAT for homes); minimum job £575
- Survey
- Free, with a fixed written quote
Removable bollards in Eccles: common uses
Around Eccles, removable bollards usually solve one of these:
- Temporary event closures and market streets
- Driveways and private parking bays
- Emergency and fire service access routes
Guide prices for Eccles
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£485 + VAT · £285–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £415–£665 + VAT · £495–£795 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £595–£825 + VAT · £705–£985 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Before we dig in Eccles
The highway authority for local roads in Eccles is Salford City Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Eccles is listed or inside a conservation area, check with the local planning authority (Salford City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On thin tarmac drives, the surround is sized so the socket does not loosen over time. Removable bollards need modest depth, which makes them one of the easier bollards to fit around services.
- Fit reflective or contrasting bands near the top so posts are visible when in place.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
Installation, step by step
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Set the socket flush
The socket is set in concrete with its rim exactly at finished surface level and to the fall of the ground, so the lid sits flat and nothing catches on it.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Options to consider
| Option | Detail |
|---|---|
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
| Socket lids | Spring-closing, hinged or lockable lids that sit flush when the post is removed, so there is no open hole. |
Pricing removable bollards in Eccles
Two Eccles jobs with the same number of posts can price quite differently. The usual reasons:
- Rated removable posts where security is required
- Post material: steel, stainless or aluminium
- Drainage at the socket base
Looking after them
If a socket has worked loose in the surface, re-bed it before the lid edge becomes a trip hazard. Lubricate locks a few times a year with a graphite or lock-specific spray, lift the posts out periodically even if they are not needed, and clear the socket of debris.
If posts in Eccles are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Eccles do you cover for removable bollards?
We cover all of Eccles (M30 and M44) and the rest of Greater Manchester. We also work in Swinton, Salford and Stretford.
Who gives permission for bollards on the pavement in Eccles?
In Eccles, work on adopted pavements and verges needs consent from Salford City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for removable bollards in Eccles?
In Eccles, typically £245–£825 per bollard with ground socket, supplied and installed, plus VAT (£285–£985 including VAT for homeowners), with a minimum job of £575 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Where do we keep the post when it is removed?
Somewhere it cannot become a trip hazard or be taken. A wall-mounted storage bracket or a locked store nearby works well. Leaving posts lying on the ground is how they get damaged or lost.
Will a removable bollard freeze in place?
It can if water sits in the socket and freezes around the post. Good drainage at the socket base is the main defence. A little lubricant on the post and lifting it out occasionally in winter also helps.
Removable bollards in nearby towns
- Swinton (1.3 mi)
- Salford (1.8 mi)
- Stretford (2.4 mi)
- Urmston (2.6 mi)
- Walkden (3.6 mi)
- Manchester (3.9 mi)