Hampshire · England
Removable bollard installation in Bordon
Planning removable bollards in Bordon? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout removable bollards in Bordon
Across Bordon, typical sites for removable bollards include schools, community car parks and high street shopfronts. When the post is out, the socket is closed with a hinged lid or cap so the surface is flush.
Coverage in Bordon takes in the GU35, GU30, GU33 and GU34 postcode districts and nearby places like Headley Down, Lindford, Arford and Standford. Nearby, we also work in Farnham (7.5 miles), Aldershot (10.2 miles), Fleet (11.8 miles) and Godalming (11.8 miles), measured as the crow flies. Portsmouth is around 24 miles away.
Local details
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for East Hampshire
- Postcodes
- GU35, GU30, GU33 and GU34
- Guide price
- Typically £265–£895 per bollard + VAT (£315–£1,045 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
What removable bollards cost in Bordon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £265–£525 + VAT · £315–£625 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £455–£715 + VAT · £545–£855 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £645–£895 + VAT · £765–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Where removable bollards go in around Bordon
Around Bordon, removable bollards usually solve one of these:
- School gates closed during drop-off and pick-up
- Gaps in a fixed bollard line that must open occasionally
- Maintenance tracks through parks and open spaces
What we check first in Bordon
Hampshire County Council is the highway authority covering Bordon's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for East Hampshire) first — we flag this at survey.
On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly. A socket set even a few millimetres proud becomes a trip edge and gets clipped by tyres and snow ploughs; one set low collects water and grit.
- Fit reflective or contrasting bands near the top so posts are visible when in place.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
Installation, step by step
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Heads and handles | Dome, flat or ball heads, with lifting handles or eyes so posts can be pulled out without strain. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
Pricing removable bollards in Bordon
Our South East guide prices are a starting point; the survey in Bordon firms them up. What tends to move them:
- Surface type and reinstatement
- Number of posts and sockets
- Drainage at the socket base
Looking after them
Check the lid springs and hinges. Lubricate locks a few times a year with a graphite or lock-specific spray, lift the posts out periodically even if they are not needed, and clear the socket of debris.
If posts in Bordon are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install removable bollards anywhere in Bordon?
We cover all of Bordon (GU35, GU30, GU33 and GU34) and the rest of Hampshire. We also work in Farnham, Aldershot and Fleet.
Who gives permission for bollards on the pavement in Bordon?
Hampshire County Council is the highway authority covering Bordon's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do removable bollards cost in Bordon?
In Bordon, typically £265–£895 per bollard with ground socket, supplied and installed, plus VAT (£315–£1,045 including VAT for homeowners), with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will a removable bollard freeze in place?
It can if water sits in the socket and freezes around the post. Good drainage at the socket base is the main defence. A little lubricant on the post and lifting it out occasionally in winter also helps.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.
Removable bollards in nearby towns
- Farnham (7.5 mi)
- Aldershot (10.2 mi)
- Fleet (11.8 mi)
- Godalming (11.8 mi)
- Farnborough (13.3 mi)
- Basingstoke (14.2 mi)