Surrey · England
Removable bollard installation in Farnham
Removable bollards supplied and fitted in Farnham, Surrey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRemovable bollards in Farnham
Removable bollards are used where vehicles need occasional rather than daily access. In Farnham, that tends to mean sites such as community buildings, filling-station forecourts and local parades.
We cover Farnham's GU9 and GU10 postcode districts, including places such as Upper Hale, Hog Hatch, Badshot Lea and Wrecclesham. Nearby, we also work in Aldershot (2.8 miles), Fleet (5 miles), Farnborough (5.8 miles) and Bordon (7.5 miles), measured as the crow flies. Reading is around 18 miles away.
Key facts for this area
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Waverley
- Postcodes
- GU9 and GU10
- Guide price
- Typically £265–£895 per bollard + VAT (£315–£1,045 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Aldershot (2.8 mi), Fleet (5 mi), Farnborough (5.8 mi), Bordon (7.5 mi)
Guide prices for Farnham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £265–£525 + VAT · £315–£625 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £455–£715 + VAT · £545–£855 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £645–£895 + VAT · £765–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Typical removable bollards jobs in Farnham
Around Farnham, removable bollards usually solve one of these:
- School gates closed during drop-off and pick-up
- Temporary event closures and market streets
- Emergency and fire service access routes
What we check first in Farnham
In Farnham, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Farnham is listed or inside a conservation area, check with the local planning authority (the council for Waverley) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
A socket set even a few millimetres proud becomes a trip edge and gets clipped by tyres and snow ploughs; one set low collects water and grit. On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly.
- Check whether the location is public highway; a highway authority agreement is usually needed there.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
How the job runs
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Socket lids | Spring-closing, hinged or lockable lids that sit flush when the post is removed, so there is no open hole. |
Pricing removable bollards in Farnham
Our South East guide prices are a starting point; the survey in Farnham firms them up. What tends to move them:
- Drainage at the socket base
- Lock type and whether locks are keyed alike
- Rated removable posts where security is required
After installation
Lubricate locks a few times a year with a graphite or lock-specific spray, lift the posts out periodically even if they are not needed, and clear the socket of debris. If a socket has worked loose in the surface, re-bed it before the lid edge becomes a trip hazard.
For damaged or loose posts in Farnham, repairs and replacements are priced in writing first.
Questions about removable bollards in Farnham
Which parts of Farnham do you cover for removable bollards?
We cover all of Farnham (GU9 and GU10) and the rest of Surrey. We also work in Aldershot, Fleet and Farnborough.
Who gives permission for bollards on the pavement in Farnham?
The highway authority for local roads in Farnham is Surrey County Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do removable bollards cost in Farnham?
In Farnham, typically £265–£895 per bollard with ground socket, supplied and installed, plus VAT (£315–£1,045 including VAT for homeowners), with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Where do we keep the post when it is removed?
Somewhere it cannot become a trip hazard or be taken. A wall-mounted storage bracket or a locked store nearby works well. Leaving posts lying on the ground is how they get damaged or lost.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.
Removable bollards near Farnham
- Aldershot (2.8 mi)
- Fleet (5 mi)
- Farnborough (5.8 mi)
- Bordon (7.5 mi)
- Godalming (8.3 mi)
- Camberley (8.8 mi)