Kent · England
Removable bollard installation in Folkestone
Removable bollards supplied and fitted in Folkestone, Kent: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageFolkestone removable bollards
We supply and fit removable bollards throughout Folkestone, typically for sites such as residential driveways, local parades and community buildings. Removable bollards are used where vehicles need occasional rather than daily access.
We cover Folkestone's CT20, CT19 and CT18 postcode districts, including places such as Hawkinge, Capel-le-Ferne, Lyminge and Densole. Nearby, we also work in Dover (7 miles), Ashford, Kent (13.5 miles), Deal (14.1 miles) and Canterbury (14.2 miles), measured as the crow flies.
Folkestone at a glance
- Area
- Kent, England
- Highway authority
- Kent County Council (local roads)
- Planning authority
- the council for Folkestone and Hythe
- Postcodes
- CT20, CT19 and CT18
- Guide price
- Typically £265–£895 per bollard + VAT (£315–£1,045 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Dover (7 mi), Ashford, Kent (13.5 mi), Deal (14.1 mi), Canterbury (14.2 mi)
What removable bollards cost in Folkestone
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £265–£525 + VAT · £315–£625 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £455–£715 + VAT · £545–£855 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £645–£895 + VAT · £765–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Removable bollards in Folkestone: common uses
Typical reasons Folkestone sites choose removable bollards:
- Temporary event closures and market streets
- Emergency and fire service access routes
- School gates closed during drop-off and pick-up
Before we dig in Folkestone
The highway authority for local roads in Folkestone is Kent County Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Folkestone need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Folkestone and Hythe before posts go in.
Removable bollards need modest depth, which makes them one of the easier bollards to fit around services. On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
- Check whether the location is public highway; a highway authority agreement is usually needed there.
Installation, step by step
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Set the socket flush
The socket is set in concrete with its rim exactly at finished surface level and to the fall of the ground, so the lid sits flat and nothing catches on it.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Choosing the right spec
| Option | Detail |
|---|---|
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
What moves the price in Folkestone
Our South East guide prices are a starting point; the survey in Folkestone firms them up. What tends to move them:
- Surface type and reinstatement
- Post material: steel, stainless or aluminium
- Number of posts and sockets
Keeping them working
If a socket has worked loose in the surface, re-bed it before the lid edge becomes a trip hazard. Removable bollards fail in predictable ways: seized locks, sockets full of grit and lids that no longer close.
For damaged or loose posts in Folkestone, repairs and replacements are priced in writing first.
Removable bollards in Folkestone: FAQs
Do you install removable bollards in Folkestone?
We cover all of Folkestone (CT20, CT19 and CT18) and the rest of Kent. We also work in Dover, Ashford, Kent and Deal.
Who gives permission for bollards on the pavement in Folkestone?
Kent County Council is the highway authority covering Folkestone's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for removable bollards in Folkestone?
In Folkestone, typically £265–£895 per bollard with ground socket, supplied and installed, plus VAT (£315–£1,045 including VAT for homeowners), with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will a removable bollard freeze in place?
It can if water sits in the socket and freezes around the post. Good drainage at the socket base is the main defence. A little lubricant on the post and lifting it out occasionally in winter also helps.
What happens to the hole when the bollard is out?
A lid on the socket closes over it so the surface is flush. Spring-closing lids shut automatically when the post is lifted. That stops trips and keeps debris out.
Removable bollards near Folkestone
- Dover (7 mi)
- Ashford, Kent (13.5 mi)
- Deal (14.1 mi)
- Canterbury (14.2 mi)
- Faversham (20.1 mi)
- Herne Bay (20.2 mi)